589669
9
Zoom out
Zoom in
Previous page
1/22
Next page
2Select a waypoint.
3Select MENU > Move Waypoint.
4Select a location on the map.
5Select ENTER.
Repositioning a Waypoint to Your Current Location
You can change the position of a waypoint. For example, if you
move your vehicle, you can change the location to your current
position.
1Select Tools > Waypoint Mgr..
2Select a waypoint.
3Select MENU > Reposition Here.
The waypoint position changes to your current location.
Increasing the Accuracy of a Waypoint Location
You can refine a waypoint location for more accuracy. When
averaging, the device takes several readings at the same
location and uses the average value to provide more accuracy.
1Select Tools > Waypoint Mgr..
2Select a waypoint.
3Select MENU > Average Location.
4Move to the waypoint location.
5Select Start.
6Follow the on-screen instructions.
7When the confidence status bar reaches 100%, select Save.
For best results, collect 4 to 8 samples for the waypoint, waiting
at least 90 minutes between samples.
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1From the main menu, select Tools > Waypoint Mgr.
2Select a waypoint.
3Select MENU > Project Waypoint.
4Follow the on-screen instructions.
5Select Save.
Deleting a Waypoint
1From the main menu, select Tools > Waypoint Mgr..
2Select a waypoint.
3Select MENU > Delete > Yes.
Routes
A route is a sequence of waypoints or locations that leads you
to your final destination.
Creating a Route
1Select Tools > Route Planner > Create Route > Select
First Point
2Select a category.
3Select the first point on the route.
4Select Use > Select Next Point.
5Select a point.
6Repeat steps 3 through 6 to add all the points in the route.
Navigating a Saved Route
1Select Tools > Route Planner.
2Select a route.
3Select View Map > Go.
4Navigate using the compass (page 6) or map (page 6).
Editing a Route
1Select Tools > Route Planner.
2Select a route.
3Select Edit Route.
4Select a point.
5Select an option:
To view the point on the map, select Review.
To change the order of the points on the route, select
Move Up or Move Down.
To insert an additional point on the route, select Insert.
The additional point is inserted before the point you are
editing.
To remove the point from the route, select Remove.
Viewing the Active Route
1Select Tools > Active Route.
2Select a point in the route to view additional details.
Reversing a Route
1Select Tools > Route Planner.
2Select a route.
3Select Reverse Route.
Deleting a Route
1Select Tools > Route Planner.
2Select a route.
3Select Delete Route > Yes.
Deleting All Routes
1From the main menu, select Tools > Route Planner.
2Select MENU > Delete All > Yes.
Tracks
A track is a recording of your path. The track log contains
information about points along the recorded path, including
time, location, and elevation for each point.
Recording Track Logs
1Select Tools > Setup > Tracks > Track Log.
2Select Record, Do Not Show or Record, Show On Map.
If you select Record, Show On Map, a line on the map
indicates your track.
3Select Record Method.
4Select an option:
To record tracks at a variable rate that creates an
optimum representation of your tracks, select Auto.
To record tracks at a specified distance, select Distance.
To record tracks at a specified time, select Time.
5Select Recording Interval.
6Complete an action:
If you selected Auto for the Record Method, select an
option to record tracks more or less often.
NOTE: Using the Most Often interval provides the most
track detail, but fills up the device memory quicker.
If you selected Distance or Time for the Record Method,
enter a value.
As you move with the device turned on, a track log is created.
Viewing the Elevation Plot of a Track
1Select Tools > Track Manager.
2Select a track.
3Select Elevation Plot.
Viewing Details about the Track
1Select Tools > Track Manager.
Waypoints, Routes, and Tracks 5
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Astro320 - DC50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Astro320 - DC50 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Astro320 - DC50

Garmin Astro320 - DC50 User Manual - German - 24 pages

Garmin Astro320 - DC50 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info