Manual Garmin Alpha100 TT 10 (page 7 of 26) (English)

657463

Zoom out

Zoom in

1/26

Dog Collar Device Setup

Methods to Add a Dog to a Handheld Device

If you purchased the collar and the handheld device separately,

you must add the collar to the handheld device. You can add up

to 20 collars to one handheld device.

There are three different methods to add (or pair) the collar to

the handheld device: using MURS/VHF, using the track/train

code, or using ANT+™.

Adding over MURS/VHF: Allows you to pair after you have

placed the collar into paring mode by pressing the Power

key.

This method is helpful when you are adding a new accessory

collar to the system prior to leaving for the hunt. See

page 3.

Entering the track and train codes: Allows you to add a dog

that you do not own and that is not in the area. The dog's

owner must determine if people can only track the dog or can

track and train the dog. This method requires the dog's

owner to find and communicate the codes to the person

adding the dog.

This method is helpful when you would like to add a dog

during a hunt, but you are not near the dog. For example,

you are adding another member of your hunting party's dog

to your handheld device, but you do not own the dog. See

page 3.

Sharing wirelessly over ANT+: Allows you to add a dog that

you do not own and that is not in the area. The dog's owner

must determine if people can only track the dog or can track

and train the dog. This method does not require the dog's

owner to find and communicate the codes to the person

adding the dog. This method also adds dog information, such

as the dog's name, communication settings, and initial

position, from the sending handheld device to your device.

The two handheld devices must be within range (10 ft.) to

share data wirelessly.

This method is helpful when you would like to add a dog

during a hunt, but you are not near the dog. For example, the

dogs have already been let loose, and you are near the dog

owner, who can share the dog wirelessly. See page 3.

Adding a Dog Over MURS/VHF

If the collar is on, turn off the collar (page 2).

Hold the Power key until the collar emits two series of

beeps, about 2 seconds, and then release the Power key.

The status LED begins blinking rapidly in green. The collar is

now ready to be linked, or paired, with a handheld device.

On the handheld device, select Dog List > Add Dog.

Bring the collar near the handheld device, and select Yes.

Enter the name of the dog, and select > OK.

Adding a Dog Using the Track and Train Codes

Before you can add a dog using the track and train codes, you

must have the dog owner find the track and train codes

(page 3) and tell them to you.

If you are not near the dog you want to add or you cannot put

the collar into pairing mode, you can add the dog using the track

and train codes.

Select Add Dog.

When asked if you are near the collar, select No.

When asked if you know the track and train codes, select

Yes.

Enter the track or train code for the collar, and select .

The dog’s track code allows you to track the dog. The dog’s

train code allows you to both track and train the dog.

Enter the name of the dog, and select > OK.

Finding the Dog ID and Track and Train Codes

You can share a dog’s track code so another person can view

your dog’s location with the map and dog tracking compass.

Also, you can share a dog’s train code so another person can

track your dog and train (correct) your dog.

Select Dog List.

Select a dog.

Select Show Info.

Sharing a Dog Wirelessly

Before you can share data wirelessly over ANT+, you must

bring your Alpha handheld device within 10 ft. (3 m) of the other

handheld device.

Select Dog List.

Select the dog to share.

Select Share Wirelessly.

Select an option:

• To allow the other person only to track your dog's location

with the map and dog tracking compass, select Track

Only.

• To allow the other person to track your dog and correct

your dog's behavior, select Track and Train.

On the other handheld device, select Dog List > >

Receive Wirelessly.

Editing Dog Information

Resetting a Dog's Statistics and Track

You might want to clear the dog statistics and track before a

new hunt.

Select Dog List.

Select a dog.

Select Show Info > Reset > Yes.

Changing the Length of the Dog's Track

You can adjust the length of the dog's tracks shown on the map.

Showing less tracks on the map can help to declutter the map

view. Changing the length of the track shown on the map does

not affect the tracks stored in the internal memory.

Select Setup > Dogs > Dog Track On Map.

Select an option to show more or less of the tracks on the

map.

Changing the Dog Name

Select Dog List.

Select a dog.

Select Show Info.

Select the dog’s name.

Enter the name, and select > OK.

Changing the Color of the Dog's Track

You can change the track color of the dog. It is helpful to have

the track color match the color of the collar strap, if possible.

Select Dog List.

Select a dog.

Select Show Info.

Select the colored square next to the dog’s name.

Select a color.

Changing the Dog Type

Before you can change the dog type, the collar must be turned

on and within range of the handheld device.

Select Dog List.

Dog Collar Device Setup 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Alpha100 TT 10 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Alpha100 TT 10 Manual

Product: