740417
14
Zoom out
Zoom in
Previous page
1/28
Next page
Before someone can receive your emergency alert, someone
must add you as a contact (Adding a Contact Using Wireless
Pairing, page 9).
You can use an emergency alert when you need immediate
assistance and you are away from your group.
Select Dog List > > > Yes.
When your contact accepts your emergency alert request,
the device displays a message indicating that your contact
has started navigating to your location.
After receiving the alert, your contacts can navigate to your
location.
Sending a Message to Your Contacts
Before you can send a message to your contacts, you must turn
on the transmitter (Turning On and Off the Transmitter, page 9).
You can send and receive automated messages. There are 18
messages you can choose from, such as "Help" and "I'm
Coming."
1
Select Dog List > > Message.
2
Select a message.
The message is sent to your contacts with your name before the
message. Anyone tracking your handheld device receives the
message.
Tracking a Contact
You can keep track of contacts' locations using the map.
Select .
Finding Your Contact ID
Press to open the status page.
The contact ID for your handheld device is listed under the
My ID option.
Changing Your Contact ID
If you are experiencing interference from other collars or
handheld devices in the area, you might need to change the
contact ID for your handheld device.
1
Press to open the status page.
2
Select My ID > ID.
3
Select a contact ID that is not yet assigned to another device
in the area.
Each time a contact changes their contact ID, you must update
the contact ID in your handheld device (Updating a Contact ID,
page 10).
Updating a Contact ID
If a contact has changed their contact ID, you can quickly
update the contact ID in your handheld device.
1
Select Dog List > .
2
Select the contact.
3
Select > Update ID.
4
Select the contact ID that matches the contact's new contact
ID.
Hunting with the Alpha System
You can perform various tasks that can be helpful when you are
hunting with the Alpha system.
Mark your truck's location (Marking Your Truck Location,
page 10).
Track your dogs (Tracking Your Dog on the Map, page 5).
Track your fellow hunters (Tracking a Contact, page 10).
Mark the location of a covey (Marking a Covey, page 10).
View your active hunt metrics (Active Hunt Metrics,
page 10).
Send messages to your fellow hunters (Sending a Message
to Your Contacts, page 10).
Turn on the collar light (Turning On the Collar Light,
page 10).
Put the collar into rescue mode to save battery power
(Turning On Rescue Mode, page 10).
Pause tracking while you move the dogs (Pausing Dog
Tracking, page 10).
Marking Your Truck Location
You can mark the location of the truck, so you can navigate
back to your truck after the hunt.
1
Select Mark Waypoint > Truck.
2
Select Save.
Marking a Covey
You can mark a covey location and enter the estimated number
of birds flushed and the number of birds taken.
1
Select Mark Waypoint > Covey.
2
Enter the number of birds flushed, the number of birds taken,
and select OK.
3
Review and edit location information (optional).
4
Select Save.
Active Hunt Metrics
You can select Hunt from the main menu to view the active hunt
metrics. The active hunt metrics page displays the active hunt
time and distance traveled for your handheld device and each
paired dog collar device. It also shows the dog status, such as
on point, treed, or barking, if available. When you select End
Hunt, the hunt timer and distance traveled stop recording.
Turning On the Collar Light
You can turn on the LEDs on the collar at night to help locate a
dog or to warn drivers if a dog wanders near a road. The light is
visible for up to 100 yards.
1
Select Dog List.
2
Select a dog.
3
Select Adjust Collar Light.
4
Select Continuous, Blink Slow, or Blink Fast.
TIP: Select different light setting for each dog to help you
identify the dogs in the field.
Turning On Rescue Mode
You can turn on rescue mode to conserve battery power at the
end of a long hunt or if your dog might get out of range.
1
Select Dog List.
2
Select a dog.
3
Select > Rescue Mode.
After you have turned on rescue mode, it stays on until you turn
it off.
When the collar battery power falls below 25%, the collar data
updates only once every 2 minutes.
Pausing Dog Tracking
You can pause the tracking of a single dog during a hunt. This
can be helpful if the dog is taking a break.
1
Select Dog List.
2
Select a dog.
3
Use the Active toggle switch to turn tracking on and off.
10 Hunting with the Alpha System
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Alpha 200i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Alpha 200i in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Alpha 200i

Garmin Alpha 200i User Manual - German - 30 pages

Garmin Alpha 200i User Manual - Dutch - 28 pages

Garmin Alpha 200i User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info