740417
6
Zoom out
Zoom in
Previous page
1/28
Next page
5
Replace the battery cover, and turn the D-ring clockwise.
Charging the Handheld Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
NOTE: The device does not charge when it is outside the
approved temperature range (Alpha Handheld Device
Specifications, page 15).
You should fully charge the battery before you use the device for
the first time. Charging a fully depleted battery takes about 4
hours.
1
Lift the weather cap .
2
Plug the small end of the power cable into the USB port on
the device.
3
Plug the other end of the power cable into an appropriate
power source.
The LCD display on the handheld device shows the current
battery charge level.
Charging the Dog Collar Device
NOTICE
To prevent corrosion, thoroughly dry the contacts on the collar
and the surrounding area before connecting the charging clip.
NOTE: Your dog collar device may look different than the device
pictured.
You should fully charge the battery before you use the device for
the first time. Charging a fully depleted battery takes about five
hours.
1
Snap the charging clip onto the device .
2
Plug the small end of the power cable into the mini-USB port
on the charging clip cable.
3
Plug the power cable into a power source.
The status LED is solid red when the collar is charging.
4
After the status LED turns solid green, remove the charging
clip from the collar.
Turning On the Device
On the handheld device, press the power key.
On the dog collar device, hold the power key until the status
LED flashes and the collar beeps.
Turning Off the Device
On the handheld device, hold the power key until the
LCD screen turns off.
On the dog collar device, hold the power key until the status
LED turns red.
Selecting a Language
When you turn on your device for the first time, you will select
the device language from a list of available languages. You can
change the language setting from the System settings.
1
From the main menu, select Setup > System > Language.
2
Select a language.
Using the Touchscreen
Select to open a menu.
Select to return to the home screen.
Select to return to the previous page.
If you are more than one menu away from the home screen,
select and hold to return to the home screen.
If scroll controls are enabled, select and to scroll
(Accessibility Settings, page 14).
Using the Status Page
The status page displays the time, your GPS signal strength,
and the device battery life. It also allows you to adjust settings
and access shortcuts. You can open the status page from any
other page by pressing the power key.
Screen brightness: Adjusts the brightness of the screen.
Messages: Allows you to send inReach
®
messages and view
received messages.
Lock Screen: Locks the touchscreen to prevent inadvertent
screen touches.
Lock Keys: Locks the device keys to prevent inadvertent key
presses.
My ID: Displays your device ID and allows you to transmit your
device information to a compatible handheld device. You can
also turn the transmitter on and off.
Alerts: Displays unread dog alerts.
Acquiring Satellite Signals
Both the collar and handheld device must acquire satellite
signals before you put the collar on your dog. Acquiring satellites
can take a few minutes.
1
Go outdoors to an open area.
2
Turn on both devices (Turning On the Device, page 2).
in the status bar shows the GPS signal strength.
When the collar has acquired satellite signals, the status LED
flashes a double-blink or triple-blink in green.
Iridium
®
Satellite Network
Your device requires a clear view of the sky to transmit
messages and track points over the Iridium satellite network.
Without a clear view of the sky, your device attempts to send the
information until it acquires satellite signals.
TIP: For the best connection with satellites, hold the device with
the antenna pointed toward the sky.
2 Getting Started
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Alpha 200i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Alpha 200i in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Alpha 200i

Garmin Alpha 200i User Manual - German - 30 pages

Garmin Alpha 200i User Manual - Dutch - 28 pages

Garmin Alpha 200i User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info