501979
2
Zoom out
Zoom in
Previous page
1/12
Next page
2 AIS 600 Instructions
Programming the AIS 600
Before the AIS 600 can be used on a boat, it must be programmed
with a unique MMSI number and with additional vessel-specic
static data. The MMSI number must be programmed by an
authorized marine-electronics dealer or installer. Use the AIS 600
Setup Software on the included CD-ROM to program the AIS 600.
Notice
In the USA, it is prohibited under FCC regulations to enter
incorrect or improper data, and it is prohibited for any person
other than the manufacturer or the installing dealer to input
MMSI data.
It is a violation of the rules of the Federal Communications
Commission to input an MMSI that has not been properly assigned
to the user, or to otherwise input any inaccurate data in this device.
Preparing the AIS 600 and the PC for
Programming
PC Requirements
Microsoft
®
Windows
®
2000 or newer; minimum 32 MB of RAM;
minimum 10 MB of free hard-drive space.
Installing the AIS 600 Setup Software:
1. Insert the CD-ROM provided with the AIS 600 into your computer.
The Installation Wizard for the AIS 600 Setup Software runs
automatically.
NOTE: To run the AIS 600 programming Setup Software installer
manually, run the Setup.exe le on the CD-ROM.
2. Follow the on-screen instructions to install the AIS 600 Setup
Software on your computer.
Connecting the AIS 600 to a PC for programming:
1. Connect the AIS 600 transceiver box to a 12 or 24 Vdc power
source using the power/data cable (see page 5).
NOTE: To ensure that the AIS 600 device powers on for
programming, connect the red wire from the power/data cable to
the positive (+) terminal of the 12 or 24 Vdc power source, and
connect both the black wire and the yellow wire from the power/
data cable to the negative (-) terminal of the 12 or 24 Vdc power
source.
2. Use the included mini USB cable to connect the USB port on the
AIS 600 transceiver box to a USB port on your computer. The
Windows Found New Hardware Wizard runs automatically.
3. Follow the on-screen instructions to complete the Found New
Hardware Wizard.
NOTE: If the Found New Hardware Wizard does not successfully
install the driver, open the Driver folder on the CD-ROM and run
CDM20600.exe to install the AIS 600 driver on your computer.
Assigning Data to the AIS 600
The AIS 600 must be programmed with a valid vessel MMSI
number before use. Until a valid MMSI number is programmed, the
AIS 600 will operate in silent mode only. When in silent mode, the
AIS 600 will not transmit position data, although it can still receive
AIS signals. Optionally, the AIS 600 transmits the following static
vessel data when assigned:
Vessel name
Vessel call sign
Vessel type
Vessel dimensions (including the location of the GPS antenna on
the boat)
To begin communication with the AIS 600:
1. Ensure that the AIS 600 transceiver box is connected to a 12 or
24 Vdc power source using the power/data cable, and that the
AIS 600 is connected to the PC using the included mini USB
cable.
2. Launch the AIS 600 Setup Software. An icon was placed on the
desktop when you installed the software.
3. Click Connect in the Connection and Status window.
To assign an MMSI number to the AIS 600:
NOTE: After you save the assigned MMSI number to the AIS
600, the MMSI number cannot be changed.
1. On the Static Data tab of the AIS 600 Setup Software, enter a
nine-digit MMSI number in the MMSI eld.
2. Click Save data to AIS600.
To program static vessel data on the AIS 600:
NOTE: Vessel static data, unlike an MMSI number, can be
reprogrammed if necessary.
1. On the Static Data tab of the AIS 600 Setup Software, enter the
vessel name, the vessel call sign, the type of vessel, and the
location of the GPS antenna on the vessel.
2. Click Save data to AIS600.
To complete the programming process:
1. From the File menu of the AIS 600 Setup Software, select Exit.
2. Disconnect the AIS 600 transceiver box from the computer.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin AIS 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin AIS 600 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin AIS 600

Garmin AIS 600 User Manual - German - 12 pages

Garmin AIS 600 User Manual - Dutch - 12 pages

Garmin AIS 600 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info