583771
21
Zoom out
Zoom in
Previous page
1/24
Next page
19
190-00356-31 Rev. C
Ryan TCAD Setup Page (9900B only)
To change a TCAD setup option:
1. Turn the small right knob to select the Traffic
Page. Press MENU to display the Page Menu.
Turn the small right knob to select “Setup?”
and press ENT.
2. The flashing cursor highlights the Mode field.
Turn the small right knob to select the mode
and press ENT. The mode selection determines
which shield definition to display and change.
Turn the large right knob to select the desired
remaining options fields. Turn the small right
knob to select the desired option and press
ENT.
3. Return to the Traffic Page by pressing CLR.
Traffic Page Fields
TherearetwoselectableeldsontheTrafcPage:
theOperatingModeFieldandtheBarometricPres-
sureField.TheOperatingModeFieldselectsthe
TCADoperatingmode.PleaserefertotheTCADPilot’s
Handbookforacompletedescriptionofallmodesof
operation.Forthe9900BXmodel,thiseldisreplaced
withtheSKYWATCHstylealtitudemode.
TCAD 9900B Operating Modes:
GND: ground mode
TML: terminal mode
STD: standard mode
ENR: en route mode
UNR: unrestricted mode
The modes APR (approach) and DEP (depar-
ture), are displayed when in that mode, but
are not manually selectable.
To select the Operating Mode:
1. From the Traffic Page, press CRSR to highlight
the operating mode field. Turn the small right
knob to select the desired operating mode and
press ENT.
NOTE: The traffic display range is automatically set to
the shield size and cannot be changed (9900B only).
Thesecondselectableeld,locatedintheupper
right-handcornerofthedisplay,istheBarometric
Pressureeld,whichdisplaystheBarometricPressure
ininchesofmercury.TheBarometricPressureeld
ontheTrafcPageallowsyoutosetthebarometric
pressureintheRyanTCADunit.Pleaserefertothe
TCADPilot’sHandbookforadetaileddescriptionof
thisfeature.
The Barometric Pressure field is located in
the upper right-hand corner of the Traffic
Page.
Section 4
Ryan TCAD Interface
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin 500W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin 500W in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info