583833
6
Zoom out
Zoom in
Previous page
1/84
Next page
2 GPSMAP 4000 Series Owner’s Manual
Getting Started
GettinG
Started
Turning on the Chartplotter
NOTE: The rst time you power on your chartplotter, you must go through a setup sequence. See
“Initializing Chartplotter Settings” (page 2).
1. Press and release the Power key. After a few moments, the Warning screen appears.
Warning Screen Home Screen
2. Press SELECT to open the Home screen.
Turning Off the Chartplotter
Press and hold the Power key.
Initializing Chartplotter Settings
The rst time you turn on your chartplotter, you must congure a series of initial settings. These
settings must also be congured when restoring original factory settings (page 4). All of these
settings can be congured later from the Congure screen (page 35).
The initial settings are as follows:
Language—select the language that will be shown on your screen.
Welcome—select OK.
Position Format—specify the coordinate system to use for location readings.
Time Format—select 12-hour, 24-hour, or UTC (Universal Time Code) to specify the format
in which time is displayed.
Time Zone—select your time zone.
Units—select Statute, Metric, or Nautical to specify units for onscreen measurements.
Minimum Safe Depth—specify the minimum safe depth for your boat. Refer to your boat
specications for more information.
Minimum Overhead Clearance—specify the minimum overhead clearance for your boat. Refer
to your boat specications for more information.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin 4000 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info