735296
24
Zoom out
Zoom in
Previous page
1/340
Next page
GB
- 24 -
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Motor power supply: ............................... 20 V DC
Idle speed n
0
: ......................................2400 min
-1
Battery charger output voltage: .............. 21 V DC
Battery charger output current: ....................... 3 A
Charging unit
supply voltage: .................... 200-250V~ 50-60Hz
Battery type: ............................................... Li-Ion
Cutter rail length ...................................... 250 mm
Max. cutting length: ................................ 230 mm
Cutting speed at rated rpm: ......................4.3 m/s
Oil tank capacity: .......................................200 ml
Weight with cutter rail +
chain + battery: ............................. approx. 3.6 kg
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 60745-1 and EN 60745-2-13.
L
pA
sound pressure level ..................... 85,7 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ....................... 95,4 dB(A)
K
WA
uncertainty ........................................2,47 dB
L
WA
sound power level guaranteed ......... 98 dB(A)
Wear ear-mu s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) were determined in accordance with EN
60745-1 and EN 60745-2-13.
Handle under load
Vibration emission value front handle
a
h
= 4,88 m/s
2
Vibration emission value rear handle
a
h
= 4 m/s
2
K uncertainty = 1.5 m/s
2
The speci ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci ed value
in exceptional circumstances.
The speci ed vibration value can be used to
compare the equipment with other electric power
tools.
The speci ed vibration value can be used for initi-
al assessment of a harmful e ect.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect wor-
king order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever ne-
cessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
5. Before starting the equipment
Warning!
Always remove the battery pack before making
adjustments to the equipment.
Danger! Do not t the battery until the chainsaw
has been fully assembled and the chain tension
has been set. Always wear protective gloves
when working on the chainsaw to protect yourself
against injury.
5.1 Assembly of the cutter rail and the saw
chain
Carefully unpack all parts and check that they
are complete (Fig. 2-3).
Undo the fixing screw of the chain wheel co-
ver (Fig. 4).
Take off the chain wheel (Fig. 5).
Lay the chain as shown in the groove which
runs around the cutter rail (Fig. 6a/Item A).
Anl_GAK_E_20_Li_OA_SPK7.indb 24Anl_GAK_E_20_Li_OA_SPK7.indb 24 19.04.2016 15:06:1919.04.2016 15:06:19
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardol GAK-E 20 Li OA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardol GAK-E 20 Li OA in the language / languages: All languages as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info