724673
22
Zoom out
Zoom in
Previous page
1/38
Next page
37cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL: №. 50712 • 11/2015 • WLCS38A-375 (toll free)
20
AFTER SALES SUPPORT
(toll free)
37cc Petrol Chainsaw
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. 50712 11/2015 WLCS38A-375
5. Depress the safety lever (2) and slightly press on
the throttle trigger (3) so the choke moves to
the run position. (Fig X).
6. Pull the recoil starter (10) again and restart the
engine. Allow the engine to warm up.
7. When restarting the engine when it is still warm,
set the choke control (9) to the “RUN” position by
depressing the safety lever (2) and depressing
the throttle trigger (3). Hold the chainsaw
securely on the ground and pull vigorously on
the recoil starter (10). Allow the engine to run for a
few moments with the throttle trigger (3) pressed in slightly.
9. When ready to start cutting, release the front guard / chain brake (12),
by pulling it firmly towards the back of the chainsaw until a click is heard.
Some generous force can be used as this is a firm operation and will
require the operator to pull back firmly. (Fig U)
Stopping the Chainsaw
1. Release the throttle trigger (3).
2. Press the on/off switch (4) to the “Off position as indicated by the “O”. (Fig T).
NOTE: Especially after the first starting of the chainsaw, the tension of the
chain should be checked.
The chain will become loose on the first start up and will require
adjustment. Refer to the Assembly / Installation of the Guide Bar and
Chain section.
Checking the Oil supply
Run the engine at medium speed and check that
the chain splatters a thin line of oil which can be
seen on the ground when the guide bar (18) is
pointed downwards (Fig Y). DO NOT ALLOW THE
TIP OF THE BAR touch ANY surface when checking
the oil flow. Keep the chain (19) and guide bar (18)
well clear of ANY surface. This is normal. If there is
no line of chain oil, stop the engine immediately
and investigate the cause. The oil tank (5) could be
empty or the oil supply to the chain blocked. This
may require removal of the guide bar (18) and checking that the upper oil
hole in the bar is clear of any blockages.
X.
Y.
Stopping the Chainsaw
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline WLCS38A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline WLCS38A in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info