724674
31
Zoom out
Zoom in
Previous page
1/42
Next page
Understanding and using these operating instructions
31cc Brushcutter / Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
(toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
31cc Brushcutter / Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. WLBCF310 • 08/2015 • 49290
29
Feeding the line
The line trimmer has a bump feed mechanism which releases the line
without having to stop the engine.
1. To release additional line increase the speed of the motor to no less than
half speed, then, lightly tap the bump knob (34) on the ground while
operating the unit at high speed.
NOTE: Always keep the line fully extended for optimum cutting
performance. Line release becomes more difficult as the cutting line
becomes shorter. Cutting efficiency also decreases as the line
becomes shorter.
The line will not extend if the speed of the spool is not operating at least
half speed. If the line does not extend, increase the speed to full speed while
tapping the bump knob on the ground. If the line still does not extend, stop
the motor and check the line inside the spool has not tangled and
also ensure there is sufficient line in the spool.
2. Each time the head is bumped it releases approximately 2cm of line.
Release the line until it strikes the cut off knife (32). This may require
several taps.
NOTE: The cut off knife (32) on the clip-on line trimmer guard attachment (33)
will automatically cut off any excess line. For best results tap the head on hard
soil or bare ground. Never bump the spool head on concrete as it may crack the
spool housing. Make sure the cut off knife (32) protector has been removed.
It is recommended to replace the protector when the line trimmer is not in use.
IMPORTANT. Do not hit stones (even small ones), piles of earth, and small
pieces of wood or anything else that could be hidden or poorly visible in the
grass. If you hit a large object by accident, or if you jam the cutting tool due
to overloading or having the cutter jammed with grass, you must stop the
engine.
NOTE: All protective devices of the machine as well as protective equipment
must be maintained in good operation condition during the period of use.
NOTE: If the line is too short you may not be able to advance the line by
tapping it on the ground. If this is the case, stop the engine and manually
advance the line.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline WLBCF310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline WLBCF310 in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info