724671
15
Zoom out
Zoom in
Previous page
1/34
Next page
26cc 2 Stroke Line Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL: №. 50750 11/2015 WLBC260X-2WNO (toll free)
AFTER SALES SUPPORT
(toll free)
26cc 2 Stroke Line Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. 50750 • 11/2015 • WLBC260X-2WNO
15
Removing the Spool and Line Assembly
NOTE: Always ensure the engine is turned off before
undertaking this assembly.
1. Using the supplied spool tool (25), insert the raised
tabs on the spool tool (25) into the notches on the
bump knob (20), and whilst holding the spool and
line assembly (21) with the other hand, loosen the
bump knob (20) in an anti-clockwise direction
until it can be removed. (Fig O)
2. Whilst holding the spool and line assembly (21)
with the other hand, remove the spool and line
assembly (21) from the spindle. (Fig P)
If replacing with a new spool and line assembly,
follow the directions in the “Fitting of the Spool
and Line section.
If replacing just the spool line on the supplied
spool and line assembly, refer to the instructions
following this section.
Changing the line only on the Spool
and Line Assembly
NOTE: Always ensure the engine is turned off before
undertaking this assembly.
NOTE: The spool and line assembly (21) supplied
with this product requires 1 length of 2mm diameter
nylon cutting line with a length NOT EXCEEDING 4
metres long. Do NOT attempt to fit larger diameter
line or length longer than 4 metres as this will
prevent the bump feed to operate correctly.
1. Whilst holding the removed spool and line
assembly (21) from the line trimmer (Note: the
bump knob (20) has already been removed),
slightly rotate the spool cover to the left or right to
release / open the assembly cover. (Fig Q/R)
Ensure the lines protruding from the eyelets are
carefully pulled out when you remove the inner if
there is any line left on the spool. (fig S). (Fig S)
P.
R.
S .
Q.
LOCK
OPEN
General Assembly
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline WLBC260X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline WLBC260X in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info