724683
19
Zoom out
Zoom in
Previous page
1/28
Next page
S U A
1800 909 909
www.globalpowerbrands.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT
PM98CC
19
5
Continue to the recoiler starter and after a number of pulls the engine will start.
mowing uneven or rough ground. Keep a firm grip on the handle bar at all times,
always walk, never run with the mower.
Mowing advice
1. It is recommended to use the fast throttle setting and keep the engine running at
maximum speed. This will deliver the best cut and extend engine life. If the speed
of the engine slows this could indicate the mower is being overloaded, by trying to
cut too much grass or the catcher may be full. Try mowing a narrower strip, mowing
slower, raising the cutting height or emptying the catcher.
2. Before mowing always check and clear the grassed area for all foreign objects,
especially solid ones semi concealed in the ground such as rocks, stumps and garden
stakes.
3. Sharp blades cut cleanly and efficiently, if the blade is dull it will tear the grass. This
will result in the ends turning brown. When the blades no longer cut cleanly either
sharpen them or replace them.
4. To safely operate the mower ensure all four wheels are on the ground and be
careful not to loose your footing or control of the mower. Be very careful when
mowing uneven or rough ground. Keep a firm grip on the handle bar at all times,
always walk, never run with the mower.
5. For healthy growth, grass should not be cut too short. The grass will remain
healthier, greener and require less watering.
6. Vary your cutting pattern from week to week, this will help to prevent matting and
graining of the grass.
Instructions
19


Need help? Post your question in this forum.

Forumrules
1

Forum

gardenline-pm99cc

Reset search

  • My mower is still working very well, despite being around ten years old. Mostly starts first pull. But, its weak point is the pressed steel frame. It is rusting through corners and is cracked near welds in four places..... Any chance of getting a new frame as a spare part and also a deflector chute when I don't want to collect clippings? Submitted on 27-9-2021 at 08:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline PM99CC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline PM99CC in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info