724641
5
Zoom out
Zoom in
Previous page
1/21
Next page
General safety warnings
4. Power tool use and care
a. Do not force the power tools. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
a. Do not use the power tool if the switch does not turn it on” and
o. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
a. Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
a. Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
a. Maintain power tools with care. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may
aect the power tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained
power tools.
a. Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
a. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for
operations dierent from those intended could result in a hazardous
situation.
Additional safety rules for Petrol Chainsaws
6 7
3. Power tool use and care
a. Do not force the power tools. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on” and
o. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
c. Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
d. Maintain power tools with care. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may
aect the power tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained
power tools.
e. Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
f. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for
operations dierent from those intended could result in a hazardous
situation.
• Never cut into the ground.
• Never cut into wire fences.
• Never cut into saplings.
• Never cut into prepared wood.
• Use the chainsaw to cut only wood.
It is advisable to provide a support for the chainsaw when cutting
branches. Do not cut using the bar point and beware of branches
under tension.
• Children under 18 must not use chainsaws.
• Keep people away from the chainsaw when in use.
• Check the following conditions before beginning work:
There should be no people in the felling area.
Make sure there is a second person within calling distance.
The working area should be free from obstacles.
• Wear suitable clothes which do not hinder movement.
Use specic protection during operations involving head, hands, feet,
eyes and ears.
It is recommended the use of a helmet with a visor during felling, branch
cutting and chopping operations.
• Wear gloves with an external protection when using the chainsaw.
• Use ear protection to prevent hearing injuries.
• Wear safety boots when using the chainsaw.
• During transport the brake must be applied to avoid accidental start-up.
• Do not use the chainsaw in rainy or windy conditions or in poor light.
• Find a suitable position before beginning work.
When working on slopes, the saw operator must stand beside or above
the wood to cut, i.e. felled trees.
Use the chainsaw holding it rmly with both hands.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline PM2006H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline PM2006H in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info