724676
24
Zoom out
Zoom in
Previous page
1/28
Next page
S U A
1800 909 909
www.powertoolsupport.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT
46460
24
Changing/replacing the spark plug
Regularly check the spark plug for wear and any build up of
carbon on the electrodes.
1. Remove the rear air filter cover (9) by turning the locking knob
in an anti-clockwise direction. Once the cover has been removed
pull off the black rubber cap from the spark plug. (Fig AJ)
WARNING. To avoid damage to the spark plug lead, ensure you
hold the rubber cap and not by the lead itself.
2. To remove spark plug use the double ended socket tool that is supplied with the
product and turn in an anti-clockwise direction.
3. Check for oil on the electrodes and clean off any excess. This can typically indicate
that the fuel mixture ratio maybe incorrect.
4. Use a soft wire brush to clean up and carbon build up on spark plug electrodes.
Replace the spark plug or reset the electrode gap to 0.6-0.7mm.
Chain sharpening
Sharpen the chain regularly to maintain optimum performance of the saw.
Signs of a dull chain are:
• Thesawdustbecomespowder-like •Extraforceisrequiredtoexecuteacut
• Thecutdoesnottrackinastraightline •Increasedvibration
• Increasedfuelconsumption
WARNING. Wear heavy gloves when handling the chain.Hold the guide bar (1)
securely in a vice.
Sharpen each cutter using a chain file. Always use outward
strokes. (Fig AK)
After sharpening, the cutters must all have the same width
and length. After every 3 - 4 times use a repair centre to
professionally sharpen your saw chain. They have the special
tools necessary to ensure the correct cutting angles and depths
are even.
Guide bar wear
Reverse the guide bar every 8 working hours to ensure uniform wear. Check the bar
rails frequently and if necessary remove burrs and square-up the rails using a flat file.
7
Maintenance
AJ
AK
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline PCH25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline PCH25 in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info