724682

Gardenline KSI-2200 Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
8
AFTER SALES SUPPORT
Tel.: 1800 909 909
www.globalpowerbrands.com email: help@globalpowerbrands.com
KSI 2200
AUS
to stop before you move the chainsaw. Always stop the motor before
moving from tree to tree.
7. Maintenance and Servicing
Always withdraw the plug when carrying out maintenance and
servicing.
• Clean the tool’s housing with a moistened cloth; in case of heavier
soiling you may use a bit of a mild dishwashing liquid. Do never
spray or splash the tool with water!
• Always remove wood shavings and oil from your chainsaw after
use. Ensure in particular that the motor ven-tilation slits for cooling
the motor in the housing of the chainsaw is free (danger of over-
heating).
• If the saw chain is particularly dirty, e.g. in case of gum-ming with
resin, remove the chain and clean it. Place the chain for a few hours
in a vessel containing chainsaw cleaner. There-after clean the chain
with clear water. If the chain is not used again immediately, it must
be treated with service spray or a customary anticorrosion-spray.
• Only in case of use of biological oil: As some biological oils may
tend to incrustation after a time, the oiling system should be rinsed
thoroughly before storing the chainsaw for a longer period. There-
fore, please  ll half of the oil reservoir (about 50 ml) with chainsaw
cleaner and close it as usually. Then switch on the chainsaw - with-
out bar and chain being mounted - and keep it running until the
total rinsing liquid has evapurated through the oil opening of the
chainsaw. Before using the chainsaw again, it is absolutely neces-
sary to re ll the oil reservoir.
• Do not store the saw outdoors or in damp and moist areas.
• Check all the chainsaw parts, in particular the chain, bar and
sprocket, of wear after every use.
• Ensure that the chain tension is correct. If the chain is too loose, it
may come o during use and lead to injuries. The chain must be
replaced immediately if it is damaged. The cutting teeth must be
at least 4 mm long.
• Check the motor housing and power cable after every use for dam-
age. If there is any sign of damage, have the chainsaw checked by
a specialised workshop or the works after-sales service.
• Check the oil level and lubrication of your chainsaw after every use.
Insu cient lubrication leads to damage to the chain, bar and motor.
• Check how keen the chain is every time before you use the chain-
saw. A blunt chain will cause overheating of the motor.
• Sharpening a saw chain requires experience and specialised knowl-
edge. We therefore recommend to have sharpening carried out by
a specialised workshop.
8. In the case of technical problems
• The machine does not start up: Check whether the current socket
is live. Check whether the power cable is undamaged. If neither
case applies, take the chainsaw to a specialised workshop or the
works after-sales service.
• Chain does not run: Check position of handguard (see ill. 7). Chain
only runs if handguard brake is released.
• Chain does not cut at all : Chain is not mounted to the correct
direction. Aseemble the chain to the correct direction.
• Sparks  y at the motor: Motor or carbon brushes damaged. Take the
chainsaw to a specialised work-shop or the works after-sales service.
• Oil does not  ow: Check the oil level. Clean the oil  ow openings
in the bar (see also the corresponding hints of “Maintenance and
servicing). If this is not successful, take the chainsaw to a specialised
work-shop or the works after-sales service.
Attention: Any maintenance or repair work going beyond that
described in these Operating Instructions may only be carried
out by authorised persons or the works after-sales service.
Attention: If the power supply lead of this device shows any
defects, the lead must be replaced by an authorized repair shop
only or through the manufacturer’s own service personnel, as
this work requires special tools
9. Repair Service
Repairs to electric power tools should only be carried out by special-
ist electrical personnel.
Always keep the original packaging for a possibly required shipping
of the tool.
10. Waste disposal and environmental protection
If your chainsaw should become useless somewhere in the future or
you do not need it any longer, do not dispose of the device together
with your domestic refuse, but dispose of it in an environmentally
friendly manner. Please dispose of the device itself at an according
collecting/recycling point.
By doing so, plastic and metal parts can be separated and recycled.
Information concerning the disposal of materials and devices are
available from your local administration.
Properly dispose of packaging material that is not required any
longer via your local waste paper disposal system.
11. Spare parts:
Bar (400 mm) Art.-Nr. 30111064
Chain (400 mm) Art.-Nr. 30019560
12. Technical Data
This chainsaw has been built in accordance with Regulation DIN
EN 60745-2-13 and ful ls the requirements of the European law on
equipment safety.
Model
Gardenline KSI 2200
Rated Voltage V~ 240
Nominal Frequency Hz 50
50Fuse (time lag) A 16
Rated Output W 2200
Nominal current A 10
Guide Bar mm 400
Cutting length mm 380
Speed m/sec ca. 10
Weight kg 5,0
Oil ml 200
All models with automatic chain lubrication and mechanical chain
brake and rundown brake.
The type designation of the chain you will  nd on the type plate.
Class of Protection: II/ DIN-EN 60745-1
Interference Suppression:
according to EN 55014
Noise emission information in accordance with the German Equip-
ment and Product Safety Act (GPSG) and the EC Machine Directive:
Noise emission values EN-60745:
Acoustic capacity level
LWA 101,7 KWA = 3,0 dB(A)
Sound Pressure Level L
pA
90 dB (A) K=3,0 dB (A)
Vibration values in accordance with EN 60745:
Weighted acceleration handle max. 6,1 m/s
2
K=1,5 m/s
2
Attention: This chainsaw is only intended for cutting wood !!!
… 10 …


Need help? Post your question in this forum.

Forumrules
1

Forum

gardenline-ksi-2200

Reset search

  • where can i get a plastic electric chainsaw drive sprocket for a Gardenline chainsaw KSI-2200?
    tony Submitted on 10-1-2023 at 06:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline KSI-2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline KSI-2200 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info