10 11
Getting Started
3
Before putting the machine
into operation
Correctly using the device
• Thehigh-pressurecleanermustbesetonalevel,stablesurface.
• Itisrecommendedthatyoumaintainthecorrectoperating
position every time you use the machine by placing one hand
on the pistol and the other on the lance.
• Neverdirectthewaterjettowardelectricallinesorthe
machine itself.
• Itisnormalforthepumptoleakalittle;thisisnecessary
to avoid damage to the pump when it is at a standstill.
• Neverusetheequipmentinpotentiallyexplosiveareasunder
any circumstances!
• Theoperatingtemperaturemustbebetween+5and+60°C.
• Donotcoverormodifythelanceorthespraynozzlesinanyway.
• Thehigh-pressurecleanerisdesignedtobeusedwithcold
orlukewarmwater(max.60°C);highertemperaturescan
damage the pump.
• Donotusewaterthatisdirty,grittyorcontainsanychemical
products, as these could impair operation and shorten the life
of the equipment.
• Whenusingthepressurewasher,werecommendyouwear
safety goggles to guard your eyes from flying debris/water spray.
Operation
The equipment consists of an assembly with a pump, which is
encased in a shock absorbing housing. The equipment comes with
a lance and a non-slip gun (for an optimal working position), whose
shape and configuration comply with the applicable regulations.
Using for the first time
Once you have completely assembled the high-pressure cleaner
and connected all connections, proceed as follows:
Turn on the water inlet supply. Press safety pin “a” (Fig. 2) on the
spray gun and pull back trigger lever “b” (Fig. 2) in order to bleed
the trapped air out of the device.
Turn on the device by switching the ON/OFF switch (Fig. 1/12) to “I”.
To temporarily turn o, release the trigger lever (b), at which point
the device goes to standby. As soon as you press the trigger lever
again (b), the high-pressure cleaner restarts.
To completely turn o the high-pressure cleaner, switch the ON/OFF
switch (Fig. 1/12) to “0”.
Using cleaning agent (Fig. 2;7)
Unscrew and remove the foam nozzle (7) from the cleaning agent
tank (15) (Fig. 7). Fill a suitable cleaning agent into the cleaning
agent tank (15) and replace the foam nozzle (7). Fit the foam nozzle
(7) to the pistol (14) as shown in Fig. 2. The cleaning agent will be
added automatically.
Holder for the gun/accessories (Fig. 1;8)
The gun and accessories can be kept in the provided holder
(10) (Fig. 8) in order to save space when not in use.
Instructions
4
Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946244
Web Support www.einhell-uk.co.uk
Model Number: 7944
Helpline No. UK/Northern Ireland 0151 649 1500 Rep. Ireland 1890 946244
Web Support www.einhell-uk.co.uk
Model Number: 7944
