Manual Gardenline DM53E3-D196 (page 18 of 24) (English)

724643

Zoom out

Zoom in

1/24

196cc 4 Stroke Petrol Lawn Mower

AFTER SALES SUPPORT

e-mail: help@powertoolsupport.com

1800 909 909

MODEL No.: DM53E3-D196 • 08/2018 • 56979

(toll free)

AFTER SALES SUPPORT

(toll free)

196cc 4 Stroke Petrol Lawn Mower

e-mail: help@powertoolsupport.com1800 909 909

MODEL No.: DM53E3-D196 • 08/2018 • 56979

32 33

Maintenance Maintenance

Replacing the Blades

NOTE. Before making any adjustment or

maintenance procedures to the lawn mower ensure

it is turned o and the spark plug lead is removed.

NOTE. Wear heavy gloves to protect your hands.

1. With the engine switched o, remove the hard

catcher (43) and lift the front of the lawn mower

upwards so the upper handle bar (1) sits on the

ground and the spark plug faces upwards.

2. Remove the blade bolt (31) using a 17mm spanner (not supplied) by

turning in an anti-clockwise direction (Fig AK), then remove the outer

ange and washer (32) (Fig AL). This allows you to be able to remove the

blade mounting plate (37) from the lawn mower.

3. To remove a single blade from the blade mounting plate (37), again use

a 17mm spanner (not supplied) to loosen and remove the nut, screw and

washers. (Fig AM/AN)

NOTE: There is 1 washer located under the screw

on the outer side of the blade mounting plate (37),

and one on the underside of the blade mounting

plate in between the blade and blade mounting

plate (37). Be careful not to lose these (Fig AO).

AN.AM.AL.

AO.

AK.

Maintenance

4. Repeat the process to remove the other 3 blades.

5. Clean the dirt and grass from around the blade mounting area.

6. Replace all 4 blades to ensure a smooth even cut and re-t them on the

mower in the reverse direction they were removed.

7. Lastly, secure the nuts rmly, (20-25Nm) repeating this for the other

3 blades.

8. Replace the blade mounting plate (37) with new blades attached, then

the outer ange (32), followed by the blade bolt (31). Retighten the blade

bolt tightly (50 – 59Nm).

NOTE: Use a wooden block to stop the blade from turning. The 4 blades

should be tightened fully but check to ensure they can still swing back

if they were to hit a solid object. Where required tighten the bolts with a

torque wrench, the centre disc blade bolt torque: 50 – 59Nm and the four

blades torque: 20-25Nm. If you do not have a torque wrench ask a mower

service dealer to tighten the blade bolts before you use the mower.

Blades should be replaced when they become worn and no longer cut

the grass cleanly. The performance of grass catching can also reduce if the

blades become worn. Replacement blade sets are available for purchase

from https://help.tools/ or by calling 1800 909 909.

Removing Oil

IMPORTANT: Drain the oil while the engine in still warm to ensure rapid and

complete draining.

1. With the engine o but still warm, disconnect the spark plug cover and

make sure it is kept away from the spark plug (27).

2. Remove the oil drain plug (36) bolt (Fig AP), using a 10mm spanner (not

supplied) in an anti-clockwise direction to loosen (Fig AQ).

WARNING:

Oil may be hot.

AQ .AP .

How do you remove the front axel cover from a DM53E3-D196 mower? Submitted on 17-5-2022 at 07:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline DM53E3-D196 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardenline DM53E3-D196 Manual

Product: