782039
42
Zoom out
Zoom in
Previous page
1/53
Next page
m CAUTION
Wear heavy duty work gloves when handling the bar and chain.
Most guide bar problems can be prevented merely by keeping the chainsaw well
maintained. Insufcient guide bar lubrication and operating the saw with a chain
that is TOO TIGHT will contribute to rapid bar wear. To help minimize bar wear, the
following guide bar maintenance procedures are recommended.
m CAUTION
Always wear protective gloves during maintenance operations.
Do not carry out maintenance when the engine is hot.
Turning the chain bar
The bar should be reversed every 8 working hours to ensure uniform wear.
Keep the bar groove and lubrication hole clean (Fig. 25).
Check the bar rails frequently for wear and, if necessary, remove the burrs and
square-up the rails using a at le (Not supplied).
m CAUTION
Never t a new chain to a worn chain bar.
Oil passages
Oil passages on the bar should be cleaned to ensure proper lubrication of the bar
and chain during operation.
m NOTICE
The condition of the oil passages can be easily checked. If the passages are clear,
the chain will automatically give off a spray of oil within seconds of starting the saw.
Your saw is equipped with an automatic oiler system.
Automatic chain lubrication
The chainsaw is equipped with an automatic oil lubrication system with a toothed
wheel drive. It automatically supplies the bar and the chain with the right quantity of
oil. The moment the engine is accelerated, the oil also starts to ow through the bar
plate more quickly as well.
46 AFTER SALES SUPPORT
aldi.service.uk@scheppach.com 00800 4003 4003
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Maintenance and servicing Petrol chainsaw 41cc
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline CSP41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline CSP41 in the language / languages: English as an attachment in your email.

The manual is 6.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info