782039
37
Zoom out
Zoom in
Previous page
1/53
Next page
1. Make sure the Chain brake lever is pulled back into the DISENGAGED
position (Fig. 11)
2. Turn the chain tensioning wheel (Fig. 9/pos. 3) IN A COUNTER-CLOCKWISE
DIRECTION until the TANG (Fig. 7) (projecting pin) is at the end of its sliding
path in the direction of the clutch and gear wheel (Fig. 9).
3. Fit the open end of the chain bar over the bar pins (Fig. 3/pos. B).
To install the saw chain
- Spread the chain out in a loop with the cutting edges (Fig. 4) pointing CLOCK-
WISE around the loop.
- Slip the chain around the sprocket behind the clutch as shown in gure 4. Make
sure the links t between the sprocket teeth.
- Guide the drive links into the groove and around the end of the bar as shown in
gure 4 - 7.
m NOTICE
The saw chain may droop slightly on the lower part of bar.
This is normal.
- Pull the chain bar forward until the chain is closely seated. Make sure that all
the drive links are in the groove of the bar.
- Align the chain bar such that the TANG ts into the hole in the chain bar shown
in gure 7.
- Align the Chain brake lever / front hand guard such that the Tangts into the
hole in the machine-case as shown in gure 6.
- Fit the Chain brake lever / front hand guard and turn the bar fastening knob &
lever (Fig. 9/pos. 18) clockwise to secure it. The chain is not allowed to slip off
the guide bar when you do this. Only loosely tighten the bar fastening
knob & lever at this stage and then follow the instructions for adjusting the chain
tension as described in the section ADJUSTING THE CHAIN TENSION.
VIII. CLEANING
m CAUTION
Set the Stop switch to Stop (0) & disconnect the spark plug boot
(Fig. 15/pos. D) before doing any cleaning and maintenance work!
Risk of electric shock, if the engine is running.
AFTER SALES SUPPORT 41
00800 4003 4003 aldi.service.uk@scheppach.com
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc Operation/Cleaning
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline CSP41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline CSP41 in the language / languages: English as an attachment in your email.

The manual is 6.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info