782039
17
Zoom out
Zoom in
Previous page
1/53
Next page
8. For felling or cross-cutting, the spike bar (claw stop) must be applied to the wood
to be cut. The use of the spike bar is also recommended when cutting through
thick branches.
9. Before every cross-cut, rmly position the spike bar and only then saw into the
wood with the chainsaw running. The saw is then lifted up using the rear grip and
guided using the front handle. The spike bar acts as a pivot point. Repositioning
is done using light pressure on the front handle. Pull the saw back slightly to do
this. Insert the spike bar deeper and lift up again using the rear grip.
Use only admitted chain saw and chain bar combination
The cutting equipment supplied is optimally matched to this chain saw.
When pairing of components do not match, the cutting attachment can be
irreparably damaged after only a short operating time and cause injury.
m NOTICE
The following information is mainly for the end user or the infrequent user. This
chainsaw has been designed for occasional use by home owners, garden owners
and campers, for general work such as clearing, cutting rewood etc. It is not
intended for longer work. During longer work, because of vibrations, there is a risk of
circulation problems in the user‘s hands (white-nger-syndrome).
White-nger-syndrome is a vascular disease where the small blood vessels in
ngers and toes contract seizure-like. The affected areas are no longer supplied
with blood and therefore look very pale.
Frequent use of vibrating machines can cause nerve damage in people whose
circulation is compromised (e.g. smokers, people with diabetes).
If you notice unusual impairment, immediately stop the work and consult a doctor.
Observe the following notices in order to reduce risks:
Keep your body, and particularly your hands, warm in cold weather.
Take regular breaks during which you should move your hands to promote
circulation.
Ensure the lowest possible vibration of the machine by regularly maintaining it
and keeping components tight.
AFTER SALES SUPPORT 21
00800 4003 4003 aldi.service.uk@scheppach.com
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc Safety regulations
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline CSP41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline CSP41 in the language / languages: English as an attachment in your email.

The manual is 6.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info