724672
12
Zoom out
Zoom in
Previous page
1/24
Next page
S U A 1800 909 909 www.powertoolsupport.com email: help@powertoolsupport.com 11/2015
AFTER SALES SUPPORT 50714
12
6. Using the 2 x toolfree blower lock knobs (23),
screw one into each side of the discharge
port to secure the blower tubes into place.
Finger tighten the toolfree lock knobs until
secure (Fig E).
Check the intake cover. For using the blower
vac as a blower, the vac tubes should not be
fitted, but the intake cover MUST be closed
and secured with the supplied green tool free
vacuum lock knob (24). (Fig F)
The blower vac is now ready for use as a
blower.
Note. The vac tubes and the collection bag
are not required for the blower operation.
Setting up for use as a Vac
Assembly of the vac tubes
1. Align the lower vac tube (10) and the vac tube nozzle (12) and
slide the vac tube inside the vac tube nozzle (12) until it will
enter no more. (Fig G)
2. Rotate the two tubes and lock them together. (Fig H)
3. Fix the two tubes together with the supplied assembly screws
using a Phillips head screw driver (not
supplied). (Fig I)
Fitting the Vac Tube to the Blower Vac Housing
1. Loosen and remove the toolfree vacuum lock
knob (24) on the intake cover (9).
2. Open the intake cover (9) and insert the vac
tube so it fits inside the round entry of the
vac housing. It is important to locate the
square tab of the lower vac tube (10) under
and into the locating keyway as the vac tube
is fitted. (Fig K/L)
3. Secure the tube by screwing in the toolfree
vacuum lock knob (24), previously removed
from the inlet cover (9). Finger tighten the
toolfree vacuum lock knob (24) until secure.
(Fig M)
Instructions 5
F.E.
G. H.
I.
L.
K.
M.
J.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline BVPTF26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline BVPTF26 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info