724632
4
Zoom out
Zoom in
Previous page
1/16
Next page
Understanding and using these operating instructions
1200W Lawn Edger
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 50752 • 11/2018 • 50752
(toll free)
4
Safe operating practices
IMPORTANT: READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
WARNING.
When using the machine the safety rules must be
followed. For your own safety and bystanders please read these
instructions before operating the machine. Please keep the
instructions safe for later use.
SAVE THESE INSTRUCTIONS
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
Safe operating practices
Training
a. Read the instructions carefully. Be familiar with the controls and the
proper use of the machine.
b. Never allow people unfamiliar with these instructions or children to use
the machine. Local regulations can restrict the age of the operator.
c. Keep in mind that the operator or user is responsible for accidents or
hazards occurring to other people or their property.
Preparation
a. Before use, check the supply and extension cord for signs of damage
or aging. If the cord becomes damaged during use, disconnect the
cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is
damaged or worn.
b. Never operate the machine while people, especially children, or pets are
nearby.
c. Wear eye protection and covered shoes at all times while operating the
machine.
Operation
a. Keep supply and extension cords away from the blade / cutting parts.
b. Use the machine only in daylight or good articial light.
c. Never operate the machine with damaged guards or shields or without
guards of shields in place.
d. Switch on the motor only when the hands and feet are away from the
blade / cutting parts.
e. Always disconnect the machine from the power supply: Whenever
leaving the machine unattended and before clearing a blockage, before
checking, cleaning or working on the machine, after striking a foreign
object and whenever the machine starts vibrating abnormally.
f. Take care against injury to feet and hands from the cutting means.
g. Always ensure that the ventilation openings are kept clear of debris.
Maintenance and storage
a. Disconnect the machine from the power supply before carrying out
maintenance or cleaning work.
b. Use only the manufacturer’s recommended replacement parts and
accessories.
c. Inspect and maintain the machine regularly. Have the machine repaired
only by an authorized repairer.
d. When not in use store the machine out of the reach of children.
Recommendation
a. The appliance should be supplied via a residual current device (RCD) with
a tripping current of not more than 30 mA.
4 5
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline 50752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline 50752 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info