724669
35
Zoom out
Zoom in
Previous page
1/36
Next page
AFTER SALES SUPPORT
(toll free)
139cc 4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. 50620 • 10/2016 • 50620
33
Recycling
Environmental protection
Recycle unwanted materials instead of disposing of them
as waste. All tools, hoses and packaging should be sorted,
taken to the local recycling centre and disposed of in an
environmentally safe way.
Specications
Engine: 139cc, Four Stroke
Engine Capacity: 139cc
Bore: 65 mm
Stroke: 42 mm
Speed: 2900 RPM/min -
1
Fuel Type: Unleaded petrol
Oil Type: 4 Stroke Motor Oil SAE 10W/30
Fuel Tank Capacity: 1.2L/1200ml
Oil Tank Capacity: 600ml
Width of cut: 40cm/400mm/(16”)
Blades: Bar Blade
Height adjustment: 8 Levels, 25 – 70mm
Spark Plug Type: Torch F6RTC
Equivalent Replacement
Spark Plugs: NGK BPR6ES, Champion RN11YC
Catcher Capacity: 45 Litres
Weight (GW): 27.6 kg
Noise label rating: 69dBA (taken at 7.5 metres)
You must wear ear protection at all times.
Product Dimensions: 123cm x 51cm x 102cm +/- tolerances (L x W x H)
This product complies with: Safety Report AS 2657:1985
EMC EN ISO 14982:2009
Problem
Possible Cause Solution
Engine does not start. Fuel tank (14) is empty.
Oil tank is empty.
Spark plug (24).
Blade hitting the grass to be cut.
Old fuel in tank or bowl.
On/Off Switch (2) not turned on.
Check the fuel tank (14), and refuel if
required.
Check the level of the oil dipstick (17),
and if low or empty, add oil.
Clean or replace if dirty or worn.
Increase the cutting height of the mower
so the blades do not make contact with
the grass on start up.
FULLY drain the fuel from the fuel tank (14)
via the drain in the bowl of the carburettor.
Even if there is no fuel in the fuel tank (14),
drain all old fuel out of the bowl.
Refer page 25.
Check the On/Off switch (2) has the “I”
depressed.
Cutting / Engine
performance
decreases.
Cutting height.
Bar blade (26) is dull or blunt.
45L hard catcher (7) is full .
Increase the cutting height using the
8 height adjustment lever (12).
Replace the blade (26) with new / sharp
blade.
NOTE: Always ensure the engine is turned
off before undertaking this task.
Empty 45L hard catcher (7).
45L hard catcher
is not filling up to
optimum level.
Cutting height too low.
Grass is wet.
Bar blade (26) is dull or blunt.
Increase the cutting height using the
8 height adjustment lever (12).
Allow the grass to dry before mowing.
Sharpen or replace bar blade (26).
Engine will not stop. On/Off switch (2) not turned Off. Depress the “O” on the On/ Off switch (2).
Remove spark plug cap.
Allow motor to continue to run until fuel
all used. Do NOT leave the mower
unattended.
For all other issues, please contact Customer Service on 1800 909 909
or email help@powertoolsupport.com
Specifications
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline 50620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline 50620 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info