724670
31
Zoom out
Zoom in
Previous page
1/42
Next page
Understanding and using these operating instructions
190cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL: №. 49291 08/2016 49291 (toll free)
Operating instructions and safety notes!
AFTER SALES SUPPORT
(toll free)
190cc 4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. 49291 • 08/2016 • 49291
29
6. Replace all 4 blades to ensure a smooth even cut and re-fit them on the
mower in the reverse direction they were removed. (Fig AK)
7. Lastly, secure the nuts firmly, (20-25Nm) repeating this for the other
3 blades.
8. Replace the blade mounting plate (37) with new blades attached, then
the outer flange (32), followed by the blade bolt (31). Retighten the blade
bolt tightly (50 – 59Nm).
NOTE: Use a wooden block to stop the blade from turning. The 4 blades
should be tightened fully but check to ensure they can still swing back
if they were to hit a solid object. Where required tighten the bolts with a
torque wrench, the centre disc blade bolt torque: 50 – 59Nm and the four
blades torque: 20-25Nm. If you do not have a torque wrench ask a mower
service dealer to tighten the blade bolts before you use the mower.
Blades should be replaced when they become worn and no longer cut
the grass cleanly. The performance of grass catching can also reduce if the
blades become worn. Replacement blade sets are available for purchase
from www.extrabattery.com.au, or by calling 1800 909 909.
Removing Oil
IMPORTANT: Drain the oil while the engine in still warm to ensure rapid and
complete draining.
1. With the engine off but still warm, disconnect the spark plug cover and
make sure it is kept away from the spark plug (27).
2. Remove the blade bolt (31) using a 17mm spanner (not supplied) by
turning in an anti-clockwise direction (Fig AG), then remove the outer
flange (32) (Fig AH). This allows you to be able to remove the blade
mounting plate (37) from the lawn mower.
3. This engine is equipped with a bottom
oil drain plug (36) (Fig AL) Remove the
oil drain plug using a 3/8” square adaptor.
(Fig AM)
WARNING:
Oil may be hot.
AL .
AM.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline 49291 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline 49291 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info