724680
17
Zoom out
Zoom in
Previous page
1/28
Next page
S U A 1800 909 909 www.powertoolsupport.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT 43668
17
5
Cutting height adjustment
WARNING: Stop the engine and unplug the spark plug before
any repairs or maintenance operations.
The mower has one lever to easily adjust the cutting height. There
are 8 height settings.
1. To decrease the cutting height pull the height adjustment lever
(6) out and move it up a notch, towards the handlebar.
2. To increase the cutting height pull the lever out and move it down a notch,
towards the engine.
3 After adjustment, ensure the lever is fully located in the
selected notch.
Adding and Checking the oil
IMPORTANT: The motor of this mower is packed with NO OIL
in the motor. Prior to starting the motor, Oil MUST be added to
the sump of the motor.
Failure to add sufficient oil will result in damage to the motor
which is NOT covered under the warranty of the mower.
On a new mower, the motor needs to be filled with 400ml’s of
SAE 10W/30 engine oil.
Each time the mower is used, the oil level should be checked
and if low, add sufficient oil to ensure the oil level is to the
full mark on the dip stick.
1. Position the lawn mower on a flat and level surface.
Clean the area directly around the oil filler cap.
2. Remove the oil filler cap by turning approx half a turn in a anti
clockwise direction and lift the cap outwards. Note: the cap is
not a threaded fit but a bayonet type fit. Clean the dip stick
with a clean cloth, cleaning away any visual oil.
3. FOR A NEW MOWER, add 400ml of SAE 10W/30 engine oil.
4. For both a new mower and also a previously used mower,
measure the amount of oil in the motor by replacing the oil
cap / dip stick on top of the plastic oil fill surround. ie do not
engage the bayonet.
5. Leave the oil cap on top of the oil fill surround for a few seconds and then remove
and inspect the oil level on the bottom of the dip stick.
Instructions
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline 43668 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline 43668 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info