Manual Gardena TCS Li-18-20 Art. 8866 (page 11 of 18) (English)

711903

Zoom out

Zoom in

1/18

Tensioning the chain:

RISK OF BURN INJURIES!

A too tightly tensioned chain can lead to motor overload and

damage, whereas insufficient tensioning can cause the chain to

jump off the rail. A correctly tensioned chain offers the best cut-

ting performance, optimum battery life and a longer service

life. Therefore, you should check the tensioning regularly as the

chain may expand when being used (especially when the chain is

new; following first installation, the tensioning of the chain must

be checked after the chainsaw has been used for a few minutes).

v However, do not tension the chain immediately after use

but wait until it has cooled down.

1. Lift the chain s off the bar e in the middle of the bar. The gap

should be approx. 2 – 3 mm.

2. Turn the adjustment screw j clockwise when the tensioning of

the chain is too low, or turn the adjustment screw j anticlock-

wise when the tensioning of the chain is too strong.

3. Screw on the lid a.

4. Start the device for approx. 10 sec.

5. Check the tensioning of the chain again and re-adjust,

if necessary.

8. Troubleshooting

DANGER! Risk of physical injury!

Cut injury when the Pole Pruner switches on

unintentionally.

v Before performing troubleshooting work, remove

the battery (see 4. Initial Operation), and slide the

protective cover w onto the bar and close until the

snap fit engages.

Problem Possible Cause Remedy

Pole Pruner does not

start up Battery is flat. v Charge battery

(see 4. Initial Operation).

Battery not pushed onto the

handle properly.

v Push battery onto the

handle and make sure that

the locking buttons snaps

in correctly.

Chain blocked. v Remove blockage.

Low runtime Chain tensioned excessively. v Tension chain

(see 7. Maintenance).

Chain not lubricated due to

lack of oil.

v Refill oil

(see 4. Initial Operation).

Hedge is not cleanly cut Chain dull or damaged. v Replace chain.

Pole Pruner cannot be

switched off Start button is stuck. v Remove battery and loosen

start button.

Pole Pruner stops.

Error-LED ß

W flashes Battery overload. v Wait for 10 sec.

Press button ß

B on the

battery and restart.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena TCS Li-18-20 Art. 8866 in the language / languages: English as an attachment in your email.

The manual is 6.94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena TCS Li-18-20 Art. 8866

Gardena TCS Li-18-20 Art. 8866 User Manual - German - 11 pages

Gardena TCS Li-18-20 Art. 8866 User Manual - Dutch - 19 pages

Gardena TCS Li-18-20 Art. 8866 User Manual - French - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena TCS Li-18-20 Art. 8866 Manual

Product: