Manual Gardena smart SILENO plus R160LiC 2018 (page 19 of 56) (English)

687475

Zoom out

Zoom in

1/56

The robotic lawnmower runs at varying distances from

the guide wire to reduce the risk of tracks forming. The

area beside the wire which the robotic lawnmower then

uses is called the Corridor. The wider the corridor

allowed by the installation, the less the risk of tracks

forming.

The robotic lawnmower always runs to the left of the

guide wire as seen facing the charging station. Thus the

corridor is to the left of the guide wire. When installing, it

is therefore important to create as much free space as

possible to the left of the guide wire, as seen facing the

charging station.

min. 2 m / 7 ft

min. 30 cm /

12"

max.

distance

The guide wire, as the boundary wire, can be stapled to

or buried in the ground.

CAUTION: Make as much space as possible to

the left of the guide wire (as seen facing the

charging station). Also, it is not allowed to lay

the guide wire closer than 30 cm from the

boundary wire.

3.7.1 Laying and connecting the guide wire

1. Before laying and connecting the guide wire, it is

important to considerate the length of the guide wire,

especially in large or complex installations. If the

guide wire is longer than 400 m the robotic

lawnmower can have difficulty following it. The

current in the guide wire always goes to the left at

the connection from the guide wire to the boundary

loop.

2. Tilt the top cover on the charging station forward and

run the guide wire through one of two channels

marked GUIDE leading to the guide connection.

3. Fit a connector to the guide wire in the same way as

for the boundary wire in

Connecting the boundary

wire on page 18

. Connect it to the contact pin on the

charging station that is labelled G1.

4. Mark the wires with the accompanying cable

markers. This makes it easier to reconnect the wires

correctly when for instance the charging station has

been stored indoors for the winter.

5. Run the guide wire through the slot under the

charging plate and then at least 2 m straight out

from the front edge of the plate.

min. 2 m / 7 ft

If the guide wire has to be installed on a steep

slope, it is an advantage to lay the wire at an angle

to the slope. This makes it easier for the robotic

lawnmower to follow the guide wire on the slope.

Avoid laying the wire at sharp angles. This can

make it difficult for the robotic lawnmower to follow

the guide wire.

135º

90º

6. Run the guide wire to the point on the boundary loop

where the guide wire is to be connected.

7. Cut the boundary wire using for instance a pair of

wire cutters. Connecting the guide wire is made

easier if an eyelet has been made on the boundary

307 - 002 - 11.10.2017 Installation - 19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena smart SILENO plus R160LiC 2018 in the language / languages: English as an attachment in your email.

The manual is 7,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena smart SILENO plus R160LiC 2018

Gardena smart SILENO plus R160LiC 2018 User Manual - German - 64 pages

Gardena smart SILENO plus R160LiC 2018 User Manual - Dutch - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena smart SILENO plus R160LiC 2018 Manual

Product: