Manual Gardena smart SILENO plus R130LiC - 2018 (page 43 of 56) (English)

687474

Zoom out

Zoom in

1/56

6 Troubleshooting

6.1 Introduction - troubleshooting

In this chapter, a number of messages are listed which may be shown in the display if there is a malfunction. There is

a proposal as to the cause and steps to take for each message. This chapter also presents some symptoms that can

guide you if the robotic lawnmower does not work as expected. More suggestions for steps to take in the event of

malfunction or symptoms can be found on www.gardena.com.

6.2 Fault messages

Below a number of fault messages are listed which may be shown in the display of the robotic lawnmower. Contact

your local GARDENA representative if the same message appears often.

Message Cause Action

Wheel motor blocked,

left

Grass or other object has wrapped around

the drive wheel.

Check the drive wheel and remove the grass

or other object.

Wheel motor blocked,

right

Grass or other object has wrapped around

the drive wheel.

Check the drive wheel and remove the grass

or other object.

Cutting system

blocked

Grass or other object has wrapped around

the blade disc.

Check the drive wheel and remove the grass

or other object.

The blade disc lies in a pool of water. Move the robotic lawnmower and prevent the

collection of water in the working area.

No loop signal

The power supply is not connected. Check the wall socket connection and wheth-

er an earth-fault breaker has tripped or not.

Check that the low voltage cable is connected

to the charging station.

The low voltage cable is damaged or not con-

nected.

Check that the low voltage cable is not dam-

aged. Check that it is also properly connected

to the charging station and to the power sup-

ply.

The boundary wire is not connected to the

charging station.

Check that the boundary wire connectors are

fitted properly to the charging station. Re-

place connectors if damaged. See

Connect-

ing the boundary wire on page 18

Boundary wire broken. Find out where the break is. Replace the

damaged section of the loop with a new loop

wire and splice using an original coupler. See

Find breaks in the loop wire on page 48

ECO mode

is activated and the robotic lawn-

mower has attempted to start outside the

charging station.

Place the robotic lawnmower in the charging

station, press the START button and close

the hatch. See

Settings on page 29

The boundary wire is crossed on its way to

and from an island.

Check that the boundary wire is laid accord-

ing to instructions, e.g. in the right direction

around the island. See

Installation on page

The connection between the robotic lawn-

mower and the charging station has been

broken.

Place the robotic lawnmower in the charging

station and generate a new loop signal, see

New loop signal on page 26

Disturbances from metal objects (fences, re-

inforcement steel) or buried cables close by.

Try moving the boundary wire.

Trapped

The robotic lawnmower has got caught in

something.

Free the robotic lawnmower and rectify the

reason for it becoming trapped.

The robotic lawnmower is stuck behind a

number of obstacles.

Check if there are any obstacles which make

it hard for the robotic lawnmower to move on

from this location.

307 - 002 - 11.10.2017 Troubleshooting - 43

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena smart SILENO plus R130LiC - 2018 in the language / languages: English as an attachment in your email.

The manual is 7,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena smart SILENO plus R130LiC - 2018

Gardena smart SILENO plus R130LiC - 2018 User Manual - German - 64 pages

Gardena smart SILENO plus R130LiC - 2018 User Manual - Dutch - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena smart SILENO plus R130LiC - 2018 Manual

Product: