687474

Gardena smart SILENO plus R130LiC - 2018 Manual

18
Zoom out
Zoom in
Previous page
1/56
Next page
1.
2.
3.5.4.3 Splicing the boundary wire
CAUTION: Twinned cables, or a screw terminal
block that is insulated with insulation tape are
not satisfactory splices. Soil moisture will cause
the wire to oxidise and after a time result in a
broken circuit.
Use an original coupler if the boundary wire is not long
enough and needs to be spliced. It is waterproof and
gives a reliable electrical connection.
Insert both wire ends in the coupler. Check that the
wires are fully inserted into the coupler so that the ends
are visible through the transparent area on the other
side of the coupler. Now press down the button on top of
the coupler fully. Use a polygrip to completely press
down the button on the coupler.
3.6 Connecting the boundary wire
CAUTION: The boundary wire must not be
crossed when connecting it to the charging
station. The right hand wire end must be
connected to the right hand pin on the charging
station and the left hand wire end to the left pin.
Connect the boundary wire to the charging station:
1. Open the connector and place the wire in the
connector grip.
2. Press the connectors together using a pair of pliers.
Press until you hear a click.
3. Cut off any surplus boundary wire. Cut 1-2 cm above
each connector.
4. Tilt the protective cover on the charging station
forward and run the wire ends up each channel at
the rear of the charging station. Press the connector
onto the metal pins, marked AL (left) and AR (right),
on the charging station.
5. Mark the wires with the accompanying cable
markers. This makes it easier to connect the wires
correctly when for instance the charging station has
been stored indoors for the winter.
3.7 Installation of the guide wire
The guide wire is used by the robotic lawnmower to find
its way back to the charging station but also to guide the
robotic lawnmower to remote areas of the garden.
The same cable roll is used for both the boundary and
guide wires. The guide wire, as the boundary wire, can
be stapled to or buried in the ground.
18 - Installation 307 - 002 - 11.10.2017
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena smart SILENO plus R130LiC - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena smart SILENO plus R130LiC - 2018 in the language / languages: English as an attachment in your email.

The manual is 7,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena smart SILENO plus R130LiC - 2018

Gardena smart SILENO plus R130LiC - 2018 User Manual - German - 64 pages

Gardena smart SILENO plus R130LiC - 2018 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info