687474
11
Zoom out
Zoom in
Previous page
1/56
Next page
3.2 Preparations
Read through this entire chapter before beginning the
installation. How the installation is done also affects how
well the robotic lawnmower works. It is therefore
important to plan the installation carefully.
Planning is simplified if you make a sketch of the
working area, including all obstacles. This makes it
easier to see the ideal positions for the charging station,
the boundary wire and the guide wire. Draw on the
sketch where the boundary and guide wires should be
routed.
Visit www.gardena.com for further descriptions and tips
regarding installation.
1. If the lawn in the working area is longer than 10 cm
mow it using a standard lawnmower. Collect the
grass.
2. Fill in holes and hollows to stop rainwater forming
pools of water. The product may be damaged if it is
operated in pools of water. See
Guarantee terms on
page 54
.
3. Read carefully through all the steps before the
installation.
4. Check that all parts for the installation are included.
See
Product overview on page 5
.
Robotic lawnmower
Charging station
Loop wire for boundary loop and guide wire
Power supply
Low voltage cable
Pegs
Connectors for the loop wire
Screws for the charging station
Measurement gauge
Couplers for the loop wire
Cable markers
3.2.1 Installation tools
During installation you will also need:
Hammer/plastic mallet (to simplify putting the pegs
in the ground).
Combination pliers for cutting the boundary wire and
pressing the connectors together.
Polygrip (for pressing the couplers together).
Edge cutter/straight spade if the boundary wire must
be buried.
3.3 Charging station
The charging station has 3 functions:
To send control signals along the boundary wire.
To send control signals in the guide wire so that the
robotic lawnmower can find the charging station.
To charge the robotic lawnmower battery.
3.3.1 Best charging station location
Take the following aspects into consideration when
identifying the best location for the charging station:
Allow minimum 3 m of free space in front of the
charging station.
It must be possible to lay minimum 1.5 m of
boundary wire straight out to the right and left of the
charging station. Any other location can mean that
the robotic lawnmower enters the charging station
sideways and will have difficulty docking.
It must be close to a wall socket. The supplied low
voltage cable is 10 m long.
A level surface free from sharp objects to place the
charging station on.
Protection from water spray for instance from
irrigation.
Protection from direct sunlight.
Place it in the lower part of a working area that has a
major slope.
Possible requirement to keep the charging station
out of sight for outsiders.
The charging station must be positioned with free space
in front of it (minimum 3 m). It should also be centrally
placed in the working area to make it easier for the
robotic lawnmower to reach all areas in the working
area.
3 m / 10 ft
2 m / 7 ft
307 - 002 - 11.10.2017 Installation - 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena smart SILENO plus R130LiC - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena smart SILENO plus R130LiC - 2018 in the language / languages: English as an attachment in your email.

The manual is 7,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena smart SILENO plus R130LiC - 2018

Gardena smart SILENO plus R130LiC - 2018 User Manual - German - 64 pages

Gardena smart SILENO plus R130LiC - 2018 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info