799106

Gardena smart SILENO life 2022 Manual

26
Zoom out
Zoom in
Previous page
1/56
Next page
Area C, approximately 20%
A
C
B
3.10.7.1 To set the Lawn Coverage function
1. Do steps 1–3 in
To get access to the menu on
page 23
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > Lawn
Coverage > Area 1-3
.
3. Use the arrow button to select the area.
4. Push the OK button.
5. Measure the distance from the charging station to
the start of the area. Measure along the guide wire.
Refer to
To measure the distance from the
charging station on page 26
.
6. Push the arrow buttons to select the distance,
measured in m.
7. Push the OK button.
8. Use the arrow buttons to select the percentage of
the cutting time the product must cut the area. The
percentage is equal to the percentage of the area
in relation to the complete work area.
a) Measure the area.
b) Divide the measured area with the total work
area.
c) Convert the result to percentage.
Note: The sum of Area 1-3 must be 100% or
less. If the sum is less than 100%, the product
sometimes straddles the guide wire and starts to
mow at the starting point. Refer to
Starting point on
page 27
.
9. Push the BACK button.
3.10.7.2 To set the CorridorCut function
Note: To prevent that the grass in the narrow passage
is worn, GARDENA recommends to set a low
percentage for the
CorridorCut
.
1. Do steps 1–3 in
To get access to the menu on
page 23
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > Lawn
Coverage > Area 1-3
.
3. Use the arrow buttons to select the area.
4. Push the OK button.
5. Measure the distance from the charging station to
the beginning of the narrow passage. Measure
along the guide wire. Refer to
To measure the
distance from the charging station on page 26
.
Note: Make sure that the distance to the
CorridorCut
is set inside the narrow passage.
6. Push the arrow buttons to select the distance.
7. Push the OK button.
8. Use the arrow buttons to select the % of the cutting
time that the product must start the narrow
passage cutting.
9. Use the arrow buttons and the OK button to select
More > CorridorCut
.
10. Push the OK button to enable
CorridorCut
.
11. Push the BACK button.
3.10.7.3 To do a test of the Lawn Coverage function
1. Put the product in the charging station.
2. Do step 1-3 in
To get access to the menu on page
23
.
3. Use the arrow buttons and the OK button to move
through the menu structure
Settings > Lawn
Coverage > Area 1-3 > More > Test
.
4. Push the OK button.
5. Push the START button.
6. Close the hatch.
7. Make sure the product can find the area.
3.10.7.4 To measure the distance from the charging
station
1. Put the product in the charging station.
2. Do steps 1–3 in
To get access to the menu on
page 23
.
3. Use the arrow buttons and the OK button to move
through the menu structure
Settings > Lawn
Coverage > Area 1-3 > How far?
4. Use the arrow buttons to set 500 m / 540 yd as a
distance.
26 - Installation 1298 - 015 - 20.08.2021
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena smart SILENO life 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena smart SILENO life 2022 in the language / languages: English as an attachment in your email.

The manual is 5.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info