672951
3
Zoom out
Zoom in
Previous page
1/4
Next page
1. STOP button
2. LED for function check of the
boundary and guide wires
3. Charging station
4. Display
5. Keypad
6. ON/OFF button
7. Start button
3. Connecting the boundary wire
See chapter 3.6 in the supplied operator’s manual or on the
GARDENA website (www.gardena.com).
1. Open the connector and lay the boundary wire in the connector.
2. Press the connector and the wire together by using a pair of pliers.
3. Cut off any surplus boundary wire. Cut off the wire 1 to 2 cm after the connectors.
4. Press the boundary wire connectors onto the contact pins marked L (left) and R (right)
on the charging station.
NOTE: The right-hand wire must be connected to the right-hand contact pin on the
charging station, and the left-hand wire to the left-hand pin.
5. Mark the wires with the accompanying cable markers. This makes it easier to reconnect
the wires correctly.
4. Laying and connecting the guide wire
See chapter 3.7 in the supplied operator’s manual or on the
GARDENA website (www.gardena.com).
1. Push the guide wire through the slot in the bottom of the charger station.
2. Fit the connector to the guide wire in the same way as for the boundary wire,
according to the instructions above.
3. Press the guide wire connector onto the contact pin marked Guide on the charging
station.
4. Pull the guide wire a minimum of 1 meter straight out from the front edge of the
charging station.
5. Lay the guide wire from the charging station to the point on the boundary wire
(eyelet) where the connection is made.
NOTE: Do not lay the guide wire at an acute angle.
6. Cut the boundary wire at the centre of the eyelet that was made in step 2.2.
7. Connect the guide wire to the boundary wire by inserting the boundary wires and
guide wire in the coupler, and pressing the coupler together with a multi-grip
pliers.
As a complement to this Quick Guide. There are step by step
installation movies available on the GARDENA website,
www.gardena.com.
Power supply
(the appearance of the power supply
may differ depending on market)
Low voltage cable
Boundary wire and
couplers
Pegs Connectors
Measurement
gauge
1
2
4
5
3
7
4
1
min 1 m / 3.3 ft
P01 QG_EN_3.indd 3 2017-12-14 13:46:09
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena smart SILENO city - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena smart SILENO city - 2018 in the language / languages: English as an attachment in your email.

The manual is 15,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena smart SILENO city - 2018

Gardena smart SILENO city - 2018 User Manual - English - 56 pages

Gardena smart SILENO city - 2018 Quick start guide - German - 4 pages

Gardena smart SILENO city - 2018 User Manual - German - 60 pages

Gardena smart SILENO city - 2018 Quick start guide - Dutch - 4 pages

Gardena smart SILENO city - 2018 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info