672952
25
Zoom out
Zoom in
Previous page
1/56
Next page
Country
3.13.5 Exclude device
To remove the wireless connection between the robotic
mower and smart system, select the
Exclude device
option in the robotic lawnmower menu. If you confirm to
exclude the device, there will be no communication
between the robotic lawnmower and other smart system
devices.
Note: The robotic lawnmower must be manually deleted
from the list of products in the GARDENA smart system
app.
3.13.6 Status
Status Connected Yes/No
Signal strength
3.13.6.1 Connected Yes/No
As soon as the robotic mower is connected to smart
system gateway, you can check the connection status
from this menu. The status is either connected (Yes) or
not connected (No).
3.13.6.2 Signal strengh
Signal strengh
Good
Poor
Bad
The signal quality between the robotic mower and the
Gateway can be either
Good, Poor
or
Bad
. The robotic
mower charging station should preferably be placed on
a garden location with
Signal strength - Good
, for best
smart system performance.
3.14 Settings
This selection allows you to carry out changes to the
security, customize the installation and change general
settings like time and date.
SETTINGS
Security
Lawn coverage
Installation
General
3.14.1 Security
Through this selection, settings relating to security and
the connection between the robotic lawnmower and the
charging station can be made. To go into the security
menu first enter the PIN code by using the up/down
arrow keys and press OK.
Security level
Advanced
Security
3.14.1.1 Security level
There are 2 security levels to choose from.
Security level
Low
High
When starting the robotic lawnmower (ON/OFF button),
both
Low
and
High
security prohibits access to the
robotic lawnmower if the PIN code is unknown. If the
wrong PIN code is entered 5 times in succession the
robotic lawnmower is blocked for a time. The blockage
time is extended for every new incorrect attempt.
Function
Low High
Time lock X X
PIN request X
Time lock
This function means that the robotic lawnmower cannot
be started after 30 days without first entering the correct
PIN code. When the 30 days has passed the robotic
lawnmower will continue to mow as normal, but the
Enter PIN code
message appears the next time STOP is
pressed. Enter the PIN code and press OK.
PIN request
This function means that the robotic lawnmower
requests a PIN code if the robotic lawnmower is in
standby and has the security setting
High
. Standby
(flashing indicator lamp) means that the operator must
press the ON/OFF button to make the robotic
lawnmower active again. The correct PIN code must be
entered before it is possible to operate the robotic
lawnmower.
3.14.1.2 Advanced
Advanced
New loop signal
Change PIN code
New loop signal
The loop signal is randomly selected to create a unique
link between the robotic lawnmower and the charging
station. In rare cases, there may be a need to generate
a new signal, for instance if two adjacent installations
have a very similar signal.
1. Place the robotic lawnmower in the charging station.
367 - 004 - 16.02.2018 Installation - 25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena Smart City Sileno 500 - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena Smart City Sileno 500 - 2018 in the language / languages: English as an attachment in your email.

The manual is 8,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena Smart City Sileno 500 - 2018

Gardena Smart City Sileno 500 - 2018 Quick start guide - English - 4 pages

Gardena Smart City Sileno 500 - 2018 Quick start guide - German - 4 pages

Gardena Smart City Sileno 500 - 2018 User Manual - German - 60 pages

Gardena Smart City Sileno 500 - 2018 Quick start guide - Dutch - 4 pages

Gardena Smart City Sileno 500 - 2018 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info