Manual Gardena SILENO plus R160 Li-LiC (page 29 of 56) (English)

687465

Zoom out

Zoom in

1/56

3.16.2.4 Exit angles > Sectors

The robotic lawnmower can be set for 1 or 2 exit

sectors. If the charging station is placed in a passage, 2

exit angles, for instance 70° - 110° and 250° - 290°, can

be used.

When 2 exit angles are used, there is a need to also

specify how often the robotic lawnmower must leave the

charging station in

Sector 1

. This is done using the

Proportion

function by initially specifying a percentage.

For instance the percentage of 75 % means that the

robotic lawnmower leaves the charging station in

Sector

on 75% of the times and 25% of the times in

Sector 2

Use the number keys to specify the required angles in

degrees for the sectors and proportion as a percentage.

3.16.2.5 Reversing distance

This functions allows you to control how far the robotic

lawnmower has to reverse out from the charging station

before it starts mowing. This is a useful function for

instance if the charging station is placed way in under a

veranda or in another limited space area.

Use the number keys to specify the required reverse

distance in centimetres. The factory setting is 60 cm.

3.16.2.6 Drive past wire

The front of the robotic lawnmower always passes the

boundary wire by a specific distance before the mower

turns around. The default distance is 32 cm, but this can

be changed if required. A figure between 25 and 40 can

be selected.

Note that the distance given is only an approximate

value and should be regarded as a guide. In reality, the

actual distance the robotic mower passes the boundary

wire can vary.

Specify the number of centimetres you want the robotic

lawnmower to pass the boundary wire and press OK.

3.17 Settings

This selection allows you to carry out changes to the

robotic lawnmower’s general settings.

SETTINGS

General

ECO mode

3.17.1 ECO mode

This function automatically turns off the signal in the

boundary loop, the guide wires and the charging station

when the robotic lawnmower is not mowing, i.e. when

the lawnmower is charging or is not allowed to mow due

to timer settings.

ECO mode

Use ECO mode

ECO mode

is suitable to use where there is other

wireless equipment not compatible with the robotic

lawnmower e.g. certain hearing loops or garage doors.

When

ECO mode

is activated, the indicator lamp in the

charging station flashes green.

ECO mode

means that

the robotic lawnmower can only be started in the

charging station and not out in the working area.

ECO mode

, it is very important to always press the

STOP button before removing the robotic lawnmower

from the charging station. It is otherwise not possible to

start the robotic lawnmower. If the lawnmower has been

removed by mistake without first pressing theSTOP

button, the lawnmower must be placed back in the

charging station and the STOP button pressed. Only

then can the robotic lawnmower be started inside the

working area.

Select

ECO mode

and press OK to activate

ECO mode

Note: Always press the STOP button before removing

the robotic lawnmower from the charging station. In

ECO mode

the robotic lawnmower otherwise can not be

started inside the working area.

3.17.2 General

Set language and time or reset user settings to factory

default.

General Time & date

Language

Country

Reset all user settings

About

3.17.2.1 Time & Date

This function allows you to set current time and date and

required formats.

307 - 002 - 11.10.2017 Installation - 29

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena SILENO plus R160 Li-LiC in the language / languages: English as an attachment in your email.

The manual is 7,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena SILENO plus R160 Li-LiC

Gardena SILENO plus R160 Li-LiC User Manual - German - 56 pages

Gardena SILENO plus R160 Li-LiC User Manual - Dutch - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena SILENO plus R160 Li-LiC Manual

Product: