681412
70
Zoom out
Zoom in
Previous page
1/88
Next page
70 - English
9. TROUBLESHOOTING
9. Troubleshooting
In this chapter, a number of messages are listed which may be shown in the display if there is a
malfunction. There is a proposal as to the cause and steps to take for each message.
This chapter also presents some symptoms that can guide you if the robotic lawnmower does not work as
expected.
More suggestions for steps to take in the event of malfunction or symptoms can be found on
www.gardena.com.
9.1 Messages
Below a number of messages are listed which may be shown in the display of the robotic lawnmower.
Contact GARDENA Central Service if the same message appears often. See Memo.
Message Cause Action
Wheel motor blocked,
left
Grass or other object has wrapped
around the drive wheel.
Check the drive wheel and remove
the grass or other object.
Wheel motor blocked,
right
Grass or other object has wrapped
around the drive wheel.
Check the drive wheel and remove
the grass or other object.
Cutting system
blocked
Grass or other object has wrapped
around the blade disc.
Check the blade disc and remove the
grass or other object.
The blade disc lies in a pool of water. Move the robotic lawnmower and if
possible prevent the collection of
water in the working area.
No loop signal The power supply is not connected. Check the wall socket connection and
whether an earth-fault breaker has
tripped. Check that the low voltage
cable is connected to the charging
station.
The boundary wire is not connected
to the charging station
Check that the boundary wire
connector is fitted properly to the
charging station. See 3.5 Connecting
the boundary wire.
Boundary wire broken. Find out where the break is. Replace
the damaged section of the loop with
a new loop wire and splice using an
original coupler. See 9.4 Finding
breaks in the loop wire.
The boundary wire is laid in the wrong
direction around an island.
Check that the boundary wire has
been laid according to the instructions
in chapter 3. Installation.
The connection between the robotic
lawnmower and the charging station
has been broken.
Place the robotic lawnmower in the
charging station and generate a new
loop signal via Security -> New loop
signal.
Disturbances from metal objects
(fences, reinforcement steel) or
buried cables close by.
Try moving the boundary wire.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R80Li - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R80Li - 2017 in the language / languages: English as an attachment in your email.

The manual is 15,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R80Li - 2017

Gardena R80Li - 2017 Quick start guide - German - 4 pages

Gardena R80Li - 2017 User Manual - German - 60 pages

Gardena R80Li - 2017 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info