584653
65
Zoom out
Zoom in
Previous page
1/76
Next page
English - 65
9. TROUBLESHOOTING
9.2 Indicator lamp in the charging station
For a fully functional installation, the indicator lamp in the charging station must emit a solid green light.
If something else appears, follow the troubleshooting guide below.
There is more troubleshooting help on www.gardena.com. If you still need help with troubleshooting,
please contact GARDENA Central Service. See Memo on page 4.
Light Cause Action
Solid green light Everything in order No action required
Blue flashing light The boundary loop is not connected
to the charging station
Check that the boundary wire
connector is fitted properly to the
charging station. See 3.5 Connecting
the boundary wire on page 27.
Break in the boundary loop Find out where the break is. Replace
the damaged section of the boundary
wire with a new loop wire and splice
using an original coupler. See
9.4 Finding breaks in the loop wire on
page 68.
Yellow flashing light The guide wire is not connected to
the charging station
Check that the guide wire connector
is properly connected to the charging
station. See 9.4 Finding breaks in the
loop wire on page 68.
Break in the guide wire Find out where the break is. Replace
the damaged section of the guide
wire with a new loop wire and splice
using an original coupler.
Red flashing light Interruption in the charging station's
antenna
Contact GARDENA Central Service.
See Memo on page 4.
Solid blue light Weak signal as the boundary wire is
too long. Max length is 250 metres.
No steps have to be taken if the
robotic lawnmower operates as
expected.
Shorten the boundary wire by
reducing the working area or
replacing islands with barriers the
robotic lawnmower can collide with.
Weak signal due to damaged
boundary wire
Since it is difficult to locate where the
wire is damaged it is recommended
to lay a new boundary wire for the
entire working area.
Solid red light Defective circuit board in the charging
station
Contact GARDENA Central Service.
See Memo on page 4.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R70Li Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R70Li Robot in the language / languages: English as an attachment in your email.

The manual is 21,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R70Li Robot

Gardena R70Li Robot Quick start guide - English - 2 pages

Gardena R70Li Robot Quick start guide - German - 2 pages

Gardena R70Li Robot User Manual - German - 80 pages

Gardena R70Li Robot Quick start guide - Dutch - 2 pages

Gardena R70Li Robot User Manual - Dutch - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info