584658
53
Zoom out
Zoom in
Previous page
1/84
Next page
English - 53
6. MENU FUNCTIONS
Test IN
The Test IN function allows you to test how well the robotic
lawnmower docks with the charging station.
Test IN can only be performed after Test OUT has been
performed.
Selecting this function causes the robotic lawnmower to travel
directly along the guide wire towards the charging station and
to dock with it. The test is approved only if the robotic
lawnmower is able to dock with the charging station at the first
attempt. If the robotic lawnmower is unable to dock on the first
attempt, it will automatically try again. The installation is not
approved if the robotic lawnmower needs two or more
attempts to dock with the charging station.
Drive past wire
The front of the robotic lawnmower always passes
the boundary wire by a specific distance before the
mower turns around. The default distance is 25 cm,
but this can be changed if required. The minimum
value is 25 cm and the maximum value is 30 cm.
Note that the distance given is only an approximate
value and should be regarded as a guide. In reality,
the actual distance the robotic mower passes the
boundary wire can vary.
Now specify the number of centimetres you want the
robotic lawnmower to pass the boundary wire and
press OK.
6.5 Security
Through this selection, settings relating to security
and the connection between the mower and the
charging station can be made.
Change PIN code
Enter the new PIN code and press OK. Enter the same
code again and confirm by pressing OK. When the PIN
code is changed, a message stating that the PIN code
has been changed appears in the display momentarily.
Make a note of the new PIN code on the designated
line in Memo on page 4.
Security level
There are three security levels to choose from: low,
medium and high Low and medium security prohibits
access to the robotic lawnmower if the PIN code is
unknown. High security also includes a warning that
beeps if the correct PIN code is not entered after a
designated time period.
To disable the robotic lawnmower, press down the
stop button and set the main switch to 0.
Guide width
Remote start 1
Remote start 2
Test settings
Drive past wire
Change PIN code
Security level
New loop signal
Timer
Installation
Security
Settings
Low
Medium
High
Change PIN code
Security level
New loop signal
1157069-26,R40Li_GB.book Page 53 Wednesday, November 19, 2014 5:02 PM
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R70Li - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R70Li - 2015 in the language / languages: English as an attachment in your email.

The manual is 90,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R70Li - 2015

Gardena R70Li - 2015 User Manual - German - 86 pages

Gardena R70Li - 2015 User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info