681409
75
Zoom out
Zoom in
Previous page
1/88
Next page
English - 75
9. TROUBLESHOOTING
9.3 Symptoms
If your robotic lawnmower does not work as expected, follow the troubleshooting guide below.
There is a FAQ (Frequently Asked Questions) on www.gardena.com which provides more detailed
answers to a number of standard questions. Contact GARDENA Central Service if you still cannot find the
reason for the fault. See Memo.
Symptom Cause Action
The robotic
lawnmower has
difficulty docking
The boundary wire is not laid in a long
straight line that is far enough out
from the charging station.
Check that the charging station has
been installed according to the
instructions in 9.4 Finding breaks in
the loop wire.
The guide wire is not inserted in the
slot at the bottom of the charging
station.
It is absolutely critical for operation
that the guide wire is perfectly straight
and is in the correct position under
the charging station. Therefore make
sure that the guide wire is always in
its slot in the charging station. See
3.6 Installation of the guide wire.
The charging station is placed in a
slope or bent.
Place the charging station on a
surface that is entirely level. The
charging station must not be tilted or
bent. See 3.2 Installation of the
charging station.
Uneven mowing
results
The robotic lawnmower works too few
hours per day.
Increase the mowing time. See
6.3 Timer.
The proportion setting is incorrect in
relation to the layout of the working
area
Check that the correct Proportion
value is selected.
The shape of the working area
requires the use of both Remote start
1 and Remote start 2 for the robotic
lawnmower to find its way to all
remote areas.
Also use Remote start 2 to steer
the robotic lawnmower to a
remote area. See 6.4 Installation,
R70Li, R80Li. Applies to the
GARDENA R70Li, R80Li only.
Working area too large. Try limiting the working area or
extending the working time.
See 6.3 Timer.
Dull blades. Replace all the blades and screws so
that the rotating parts are balanced.
See 8.6 Replacing the blades.
Long grass in relation to the set
cutting height.
Increase the cutting height and then
successively lower.
Accumulation of grass by the blade
disc or around the motor shaft.
Check that the blade disc rotates
freely and easily. If not, screw off the
blade disc and remove grass and
foreign objects. See 8.3 Cleaning.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R45Li - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R45Li - 2017 in the language / languages: English as an attachment in your email.

The manual is 15,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R45Li - 2017

Gardena R45Li - 2017 Quick start guide - German - 4 pages

Gardena R45Li - 2017 User Manual - German - 60 pages

Gardena R45Li - 2017 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info