584652
63
Zoom out
Zoom in
Previous page
1/76
Next page
English - 63
9. TROUBLESHOOTING
Trapped The robotic lawnmower has got
caught in something.
Free the robotic lawnmower and
rectify the reason for it becoming
trapped.
The robotic lawnmower is stuck
behind a number of obstacles.
Check if there are any obstacles
which make it hard for the robotic
lawnmower to move on from this
place.
Outside working area The boundary wire connections to the
charging station are crossed.
Check that the boundary wire is
connected correctly.
The boundary wire is too close to the
edge of the working area.
Check that the boundary wire has
been laid according to the instructions
in chapter 3. Installation.
The working area slopes too much. Check that the boundary wire has
been laid according to the instructions
in chapter 3. Installation.
The boundary wire is laid in the wrong
direction around an island.
Check that the boundary wire has
been laid according to the instructions
in chapter 3. Installation.
Disturbances from metal objects
(fences, reinforcement steel) or
buried cables close by.
Try moving the boundary wire.
The robotic lawnmower finds it hard
to distinguish the signal from another
robotic lawnmower installation close
by.
Place the robotic lawnmower in the
charging station and generate a new
loop signal via Security -> New loop
signal.
Low battery The robotic lawnmower cannot find
the charging station.
Check that the charging station and
the guide wire are installed in
accordance with the instructions in
Chapter 3. Installation on page 15.
The guide wire is broken or not
connected.
Check that the indicator lamp in the
charging station flashes yellow. See
the solution in 9.2 Indicator lamp in
the charging station on page 65.
The battery is spent. Replace the battery. See
8.7 Replacing the battery on page 61.
The charging station's antenna is
defective.
Check if the indicator lamp in the
charging station flashes red. See the
solution in 9.2 Indicator lamp in the
charging station on page 65.
Wrong PIN Wrong PIN code has been entered.
Five attempts are permitted, and the
keypad is then blocked for five
minutes.
Enter the correct PIN code. Contact
GARDENA Central Service if you
forget the PIN code. See Memo on
page 4.
Message Cause Action
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R40Li Robot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R40Li Robot in the language / languages: English as an attachment in your email.

The manual is 21,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R40Li Robot

Gardena R40Li Robot Quick start guide - English - 2 pages

Gardena R40Li Robot Quick start guide - German - 2 pages

Gardena R40Li Robot User Manual - German - 80 pages

Gardena R40Li Robot Additional guide - Dutch - 5 pages

Gardena R40Li Robot Quick start guide - Dutch - 2 pages

Gardena R40Li Robot User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info