681414

Gardena R160LiC - smart SILENO plus Manual

74
Zoom out
Zoom in
Previous page
1/84
Next page
English - 73
TROUBLESHOOTING
9.3 Indicator lamp in the charging station
For a fully functional installation, the indicator lamp in the charging station must emit a solid green light. If something
else appears, follow the troubleshooting guide below.
There is more troubleshooting help on www.gardena.com. If you still need help with troubleshooting, please contact
GARDENA Central Service. See MEMO on page 2
Light Cause Action
Solid green light Good signals No action required
Green ashing light
The signals are good and ECO mode
is activated.
No action required. For more information on ECO
mode, see 6.8 Settings on page 56.
Blue ashing light
The boundary loop is not connected
to the charging station
Check that the boundary wire connectors are
tted properly to the charging station. See 3.5
Connecting the boundary wire on page 27.
Break in the boundary loop
Find out where the break is. Replace the
damaged section of the loop with a new loop
wire and splice using an original coupler.
Red ashing light
Interruption in the charging station’s
antenna
Contact GARDENA Central Service. See MEMO
on page 2
Solid blue light
Weak signal as the boundary wire is
too long. Max length is 800 metres.
No steps have to be taken if the robotic
lawnmower operates as expected.
Shorten the boundary wire by reducing the
working area or replacing islands with barriers
the robotic lawnmower can collide with.
Solid red light
Defective circuit board in the
charging station
Contact GARDENA Central Service. See MEMO
on page 2
9.4 Symptoms
If your robotic lawnmower does not work as expected, follow the troubleshooting guide below.
There is a FAQ (Frequently Asked Questions) on www.gardena.com which provides more detailed answers to a
number of standard questions. Contact GARDENA Central Service if you still cannot nd the reason for the fault.
See MEMO on page 2
Symptoms Cause Action
The robotic
lawnmower has
difculty docking with
the charging station
The charging station is on a slope
Place the charging station on a surface that is
entirely level. See 3.2 Installation of the charging
station on page 16.
The boundary wire is not laid
correctly by the charging station.
Check that the charging station has been
installed according to the instructions. See 3.2
Installation of the charging station on page 16.
1157808,Gardena_R100Li-R130Li,GB_151217.indd 73 2016-01-12 09:17:10
… 74 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R160LiC - smart SILENO plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R160LiC - smart SILENO plus in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R160LiC - smart SILENO plus

Gardena R160LiC - smart SILENO plus User Manual - German - 64 pages

Gardena R160LiC - smart SILENO plus User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info