681414
39
Zoom out
Zoom in
Previous page
1/84
Next page
English - 38
USE
4.7 Adjusting the cutting height
The cutting height can be varied from MIN (2 cm) to MAX
(6 cm) in nine stages.
During the rst week after a new installation, the cutting
height must be set to MAX to avoid damaging the loop
wire. After this, the cutting height can be lowered one
step every week until the desired cutting height has been
reached.
If the grass is long, allow the robotic lawnmower to start
mowing at the MAX cutting height. Once the grass is
shorter, you can gradually lower the cutting height.
To adjust the cutting height:
1. Press the STOP button to stop the robotic
lawnmower
2. Open the cutting height adjustment hatch.
3. Turn the knob to the required position. The selected
position is the marking on the body that aligns with
the arrow on the knob. Turn clockwise to increase the
cutting height. Turn counter-clockwise to decrease
the cutting height.
4. Close the hatch.
3018-223
IMPORTANT INFORMATION
During the rst week after a new installa-
tion, the cutting height must be set to MAX
to avoid damaging the loop wire. After
this, the cutting height can be lowered one
step every week until the desired cutting
height has been reached.
3018-214
3018-202
1157808,Gardena_R100Li-R130Li,GB_151217.indd 38 2016-01-12 09:16:36
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R160LiC - smart SILENO plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R160LiC - smart SILENO plus in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R160LiC - smart SILENO plus

Gardena R160LiC - smart SILENO plus User Manual - German - 64 pages

Gardena R160LiC - smart SILENO plus User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info