672941
41
Zoom out
Zoom in
Previous page
1/84
Next page
English - 40
CONTROL PANEL
The keypad consists of six groups of buttons:
The START button is used to activate the robotic
lawnmower. This is normally the last button to be
pressed before closing the display hatch.
The Back and OK buttons are used to navigate in the
menu. The OK button is also used to conrm settings
in the menu.
The arrow keys are used to navigate in the menu but
also to make selections in certain setting options.
The MENU button is used to go to the main menu.
The PARK button is used to send the robotic
lawnmower to the charging station.
Numbers are used to enter settings, for example, PIN
code, time or exit direction. They can also be used
to enter a number series for shortcuts to the various
menus. See 6.1 Main menu on page 42.
5.1 Operation selection Start
When the START button has been pressed the following
operation selections can be selected.
Main area
The standard, automatic operating mode where the
robotic lawnmower mows and charges continually.
Secondary area
The Secondary area operating mode is used when
mowing secondary areas where the robotic lawnmower
cannot travel to the charging station automatically.
For information about secondary areas, see 3.4
Installation of the boundary wire on page 21.
Selecting Secondary area will cause the robotic
lawnmower to mow until the battery is empty.
If the robotic lawnmower charges in the Secondary area
mode, it will fully charge, drive out about 50 cm and then
stop. This indicates that it is charged and ready to start
mowing.
If the main working area has to be cut after charging, it
is appropriate to switch the operation selection to Main
area before placing the robotic lawnmower in the charging
station.
Override timer
Any timer settings made can be temporarily overridden
by selecting Override timer. It is possible to override the
timer for 24 h or 3 days.
3018-301
3018-239
1157808,Gardena_R100Li-R130Li,GB_151217.indd 40 2016-01-12 09:16:40
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R160Li Sileno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R160Li Sileno in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R160Li Sileno

Gardena R160Li Sileno User Manual - German - 64 pages

Gardena R160Li Sileno User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info