672941
22
Zoom out
Zoom in
Previous page
1/84
Next page
English - 21
INSTALLATION
3.4 Installation of the boundary wire
Ensure correct installation of the boundary wire according to the instruction
The boundary wire can be installed in one of the following ways:
Secure the wire to the ground with pegs.
It is preferable to staple down the boundary wire if you want to make adjustments to the boundary loop during
the rst few weeks of operation. After a few weeks the grass will have grown over the wire making it no longer
visible. Use a hammer/plastic mallet and the pegs supplied when carrying out the installation.
Bury the wire.
It is preferable to bury the boundary wire if you want to dethatch or aerate the lawn. If necessary, both methods
can be combined so one part of the boundary wire is pegged down and the remainder is buried. The wire can
be buried for instance using an edge cutter or a straight spade. Make sure to lay the boundary wire at least 1
cm and a maximum of 20 cm in the ground.
Plan where to lay the boundary wire
The boundary wire must be laid so that:
The wire forms a loop around the working area for the robotic lawnmower. Only original boundary wire must be
used. It is specially designed to resist dampness from the soil that could otherwise easily damage the wires.
The robotic lawnmower is never more than 35 metres from the wire at any point in the entire working area.
The wire is no more than 800 metres long.
About 20 cm of extra wire is available to which the guide wire will be connected later. See 3.6 Installation of the
guide wire on page 28 .
Depending on what the working area is adjacent to, the boundary wire must be laid at different distances from
obstacles. The illustration below shows how the boundary wire must be laid around the working area and around
obstacles. Use the supplied measurement gauge to obtain the correct distance. See 2.1 What is what? on page 11.
3023-031
1157808,Gardena_R100Li-R130Li,GB_151217.indd 21 2016-01-12 09:16:08
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R160Li Sileno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R160Li Sileno in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R160Li Sileno

Gardena R160Li Sileno User Manual - German - 64 pages

Gardena R160Li Sileno User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info