672939
30
Zoom out
Zoom in
Previous page
1/84
Next page
English - 29
INSTALLATION
Laying and connecting the guide wire
1. Before laying and connecting the guide wire, it
is important to give consideration to the length
of the guide loop, especially in large or complex
installations. If the guide loop is longer than 400
metres the robotic lawnmower can have difculty
following the guide wire.
The guide wire together with the section of the
boundary loop that makes up the return wire to
the charging station is called the guide loop. The
current in the guide loop always goes to the left at
the connection from the guide wire to the boundary
loop. The two gures here display what is regarded
as a guide loop. The gures are also a good
example of how the guide loop in a working area
can have very varying lengths depending on where
the charging station is placed.
2. Tilt the top cover on the charging station forward
and run the guide wire through one of two
channels marked GUIDE leading to the guide
connection.
3. Fit a connector to the guide wire in the same
way as for the boundary wire in 3.5 Connecting
the boundary wire on page 27. Connect it to the
contact pin on the charging station that is labelled
G1.
4. Mark the wires with the accompanying cable
markers. This makes it easier to reconnect the
wires correctly when for instance the charging
station has been stored indoors for the winter.
5. Run the guide wire straight under the charging
plate and then at least 2 metres straight out from
the front edge of the plate.
Consider when laying the guide wire that as much
space as possible is provided to the left (as seen
facing the charging station) of the guide wire. The
distance between the boundary loop and the guide
wire must however be always at least 30 cm.
G
Min 2m
3018-242
3023-009
3023-010
Min 2 m/7 ft
Maximum
distance
Min 30 cm/12”
3023-011
1157808,Gardena_R100Li-R130Li,GB_151217.indd 29 2016-01-12 09:16:26
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R130Li Sileno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R130Li Sileno in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R130Li Sileno

Gardena R130Li Sileno Quick start guide - German - 4 pages

Gardena R130Li Sileno User Manual - German - 64 pages

Gardena R130Li Sileno User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info