672939
23
Zoom out
Zoom in
Previous page
1/84
Next page
English - 22
INSTALLATION
Working area boundaries
If a high obstacle (5 cm or more), for example a wall
or fence, borders the working area, the boundary wire
should be laid 35 cm from the obstacle. This will prevent
the robotic lawnmower from colliding with the obstacle
and reduce body wear.
About 20 cm of the lawn around the xed obstacle will not
be mown.
If the working area borders on a small ditch, for example
a ower bed or a small elevation, for example a low
kerbstone (1-5 cm), the boundary wire should be laid
30 cm inside the working area. This prevents the wheels
from driving into the ditch or up onto the kerbstone
which might be lead to excessive wear on the robotic
lawnmower, and especially the front wheels.
About 15 cm of the lawn along the ditch/kerbstone will not
be mown.
If the working area borders on a paving stone path or
similar that is level with the lawn (+/- 1 cm), it is possible
to allow the robotic lawnmower to run a little over the
path. The boundary wire should then be laid 10 cm from
the edge of the path.
All the grass along the side of the paving stone path will
be cut.
When the working area is divided by a paving stone
path that is level with the lawn, it is possible to allow the
robotic lawnmower to run over the path. It can be an
advantage to lay the boundary wire under the paving
stones. The boundary wire can also be laid in the joint
between the paving stones. Ensure that the tiles are in
level with the lawn to avoid excessive wear on the robotic
lawnmower.
Note: The robotic lawnmower must never run over
gravel, mulch or similar material which can damage the
blades.
IMPORTANT INFORMATION
If the working area is adjacent to water
bodies, slopes, precipices or a public
road, the boundary wire must be supple-
mented with an edging or the like. It must
then be at least 15 cm in height. This will
prevent the robotic lawnmower from end-
ing up outside the working area under any
circumstance.
Min.
15cm
3018-046
35 cm
> 5 cm
3018-205
1-5 cm
30 cm
3018-206
10 cm
max 1 cm
3018-208
3018-207
1157808,Gardena_R100Li-R130Li,GB_151217.indd 22 2016-01-12 09:16:12
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R130Li Sileno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R130Li Sileno in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R130Li Sileno

Gardena R130Li Sileno Quick start guide - German - 4 pages

Gardena R130Li Sileno User Manual - German - 64 pages

Gardena R130Li Sileno User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info