672938
68
Zoom out
Zoom in
Previous page
1/84
Next page
English - 67
MAINTENANCE
To replace the blades:
1. Set the main switch to position 0.
2. Wear protective gloves.
3. Turn the robotic lawnmower upside down.
4. Remove the three screws. Use a straight slot or
cross-tip screwdriver.
5. Remove the blade and the screw.
6. Screw on the new blade and the new screw.
Check that the blades can pivot freely.
8.7 Software update
Owners of GARDENA robotic lawnmowers can download
regular software updates from the GARDENA website
and install them on their robotic lawnmowers. Registered
users will be notied of this by email. To download new
software, the robotic lawnmower is connected to a
computer using the accompanying USB cable.
1. Connect the USB cable between your computer
and the robotic lawnmower.
Remove the service outlet plug on the bottom of
the mower. The service outlet is located beside
the main switch.
Connect the USB cable to the computer’s USB
ports.
Connect the USB cable to the robotic lawnmower
service outlet. The USB cable can only be
connected in one way.
2. Set the main switch to position 1.
3. Follow the software update instructions from your
received email.
4. When the mower programming is completed
disconnect the USB cable and t the service outlet
plug. If the seal on the service outlet plug is visibly
damaged, the entire plug must be replaced. Make
sure the plug is locked completely.
3018-231
3012-272
3018-213
3018-256
1157808,Gardena_R100Li-R130Li,GB_151217.indd 67 2016-01-12 09:17:08
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R100LiC Sileno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R100LiC Sileno in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R100LiC Sileno

Gardena R100LiC Sileno Quick start guide - German - 4 pages

Gardena R100LiC Sileno User Manual - German - 64 pages

Gardena R100LiC Sileno User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info