672938
57
Zoom out
Zoom in
Previous page
1/84
Next page
English - 56
MENU FUNCTIONS
Drive past wire
The front of the robotic lawnmower always passes the
boundary wire by a specic distance before the mower
turns around. The default distance is 32 cm, but this can
be changed if required. A gure between 15 and 50 can
be selected.
Note that the distance given is only an approximate value
and should be regarded as a guide. In reality, the actual
distance the robotic mower passes the boundary wire can
vary.
Specify the number of centimetres you want the robotic
lawnmower to pass the boundary wire and press OK.
6.8 Settings
This selection allows you to carry out changes to the
robotic lawnmower’s general settings.
ECO mode
This function automatically turns off the signal in the
boundary loop, the guide wires and the charging station
when the robotic lawnmower is not mowing, i.e. when the
lawnmower is charging or is not allowed to mow due to
timer settings.
ECO mode is suitable to use where there is other wireless
equipment not compatible with the robotic lawnmower
e.g. certain hearing loops or garage doors.
When the loop signal is turned off due to the ECO mode,
the indicator lamp in the charging station ashes green.
When the indicator lamp ashes green the robotic
lawnmower can only be started in the charging station
and not out in the working area.
In ECO mode, it is very important to always press the
STOP button before removing the robotic lawnmower
from the charging station. In ECO mode it is otherwise not
possible to start the robotic lawnmower. If the lawnmower
has been removed by mistake without rst pressing the
STOP button, the lawnmower must be placed back in the
charging station and the STOP button pressed. Only then
can the robotic lawnmower be started inside the working
area.
IMPORTANT INFORMATION
Always press the STOP button before
removing the robotic lawnmower from the
charging station. In ECO mode the robotic
lawnmower otherwise will not be started
inside the working area.
Select ECO mode and press OK to activate ECO mode.
3018-318
Set time Set date Time format Date format
Time &
date
Country
Reset
all user
settings
Language
About
Settings
ECO mode
On / Off
General
1157808,Gardena_R100Li-R130Li,GB_151217.indd 56 2016-01-12 09:16:59
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R100LiC Sileno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R100LiC Sileno in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R100LiC Sileno

Gardena R100LiC Sileno Quick start guide - German - 4 pages

Gardena R100LiC Sileno User Manual - German - 64 pages

Gardena R100LiC Sileno User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info