672938
49
Zoom out
Zoom in
Previous page
1/84
Next page
English - 48
MENU FUNCTIONS
Advanced
New loop signal
The loop signal is randomly selected to create a unique
link between the robotic lawnmower in question and the
charging station. In rare cases, there may be a need
to generate a new signal, for instance if two adjacent
installations have a very similar signal.
1. Place the robotic lawnmower in the charging
station to which the robotic lawnmower is to
be connected.
2. Select New loop signal in the menu and press OK.
Press OK and await conrmation that the loop signal has
been generated. This normally takes about 10 seconds.
Change PIN code
Enter the new PIN code and press OK. Conrm by
entering the same code again and pressing OK. When
the PIN code is changed, the message PIN code changed
appears in the display momentarily.
Make a note of the new PIN code on the designated line
in Memo on page 2.
6.5 SensorControl
Only applicable for GARDENA R130Li, R130LiC and
R160Li.
This function allows the robotic lawnmower to
automatically adjust its mowing times based on how quick
the lawn grows. When the weather is good for grass
growth, the robotic lawnmower mows more often and
when grass growth is slower the robotic lawnmower will
automatically spend less time on the lawn.
The robotic lawnmower will however not operate longer
than the time that may be congured in the timer
settings. For optimal SensorControl performance, it
is recommended when setting the timer to only de-
select the times when the robotic lawnmower must not
operate. Other times should be made available for the
SensorControl.
When the SensorControl is activated, the robotic
lawnmower needs time to decide what the optimal
mowing time is for the working area in question. For this
reason it can take a number of days before the mowing
results are optimal.
When the SensorControl is activated, it is very important
to regularly check that the blade disc is clean and that the
blades are in good condition. Any grass twisted around
the blade disc shaft or blunt blades can affect how the
SensorControl functions.
SensorControl
Cutting timeOn/Off
Low Medium High
1157808,Gardena_R100Li-R130Li,GB_151217.indd 48 2016-01-12 09:16:52
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R100LiC Sileno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R100LiC Sileno in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R100LiC Sileno

Gardena R100LiC Sileno Quick start guide - German - 4 pages

Gardena R100LiC Sileno User Manual - German - 64 pages

Gardena R100LiC Sileno User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info