672938
24
Zoom out
Zoom in
Previous page
1/84
Next page
English - 23
INSTALLATION
Boundaries within the working area
Use the boundary wire to isolate areas inside the working
area by creating islands around obstacles which cannot
withstand a collision, for example owerbeds, bushes and
fountains. Lay the wire up to and around the area to be
isolated, and then return it back along the same route.
If pegs are used, the wire should be laid under the same
pegs on the return route. When the boundary wires to
and from the island are laid close together, the robotic
lawnmower can drive over the wire.
Obstacles that can withstand a collision, for example,
trees or bushes taller than 15 cm, do not need to be
isolated with the boundary wire. The robotic lawnmower
will turn around when it collides with this type of obstacle.
It is recommended to isolate all xed objects in and
around the working area. This results in the most gentle
and silent operation and prevent the robotic lawnmower
from getting stuck in the objects under any circumstances.
Obstacles that slope slightly, for example stones or large
trees with raised roots, must be isolated or removed.
Otherwise the robotic lawnmower can slide up onto this
kind of obstacle causing the blades to be damaged.
Secondary areas
If the working area consists of two areas which the
robotic lawnmower has difculty travelling between, it is
recommended to set up a secondary area. Instances of
this are 35% slopes or a passage that is narrower than
60 cm. Lay the boundary wire then around the secondary
area so that it forms an island outside of the main area.
The robotic lawnmower must be moved manually
between the main and secondary area when the lawn
in the secondary area has to be cut. The Secondary
area (A) operating mode must be used as the robotic
lawnmower cannot travel on its own from the secondary
area to the charging station. See 5.1 Operation selection
Start on page 40. In this mode, the robotic lawnmower
will never look for the charging station but will mow until
the battery runs out. When the battery is at, the robotic
lawnmower will stop and the Needs manual charging
message will appear in the display. Then place the robotic
lawnmower in the charging station to charge the battery.
If the main area has to be cut straight after charging, the
START button must be pressed and the Main area (B)
selected before closing the hatch.
IMPORTANT INFORMATION
The boundary wire may not be crossed on
its way to and from an island.
3023-005
3012-686
3018-209
A
B
3023-006
1157808,Gardena_R100Li-R130Li,GB_151217.indd 23 2016-01-12 09:16:14
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena R100LiC Sileno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena R100LiC Sileno in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena R100LiC Sileno

Gardena R100LiC Sileno Quick start guide - German - 4 pages

Gardena R100LiC Sileno User Manual - German - 64 pages

Gardena R100LiC Sileno User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info