Manual Gardena CST 3519-X-8862 (page 14 of 21) (English)

474441

Zoom out

Zoom in

1/21

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the

guide bar touches an object (Fig B3), or when

the wood closes in and pinches the saw chain in

the cut.

Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and

back towards the operator.

Pinching the saw chain along the top of the guide

bar may push the guide bar rapidly back towards

the operator.

Either of these reactions may cause you to lose

control of the saw which could result in serious

personal injury. Do not rely exclusively upon the

safety devices built into your saw. As a chain

saw user, you should take several steps to keep

your cutting jobs free from accident or injury.

Kickback is a result of tool misuse and/or

incorrect operating procedures or conditions and

can be avoided by taking proper precautions as

given below:

• Maintain a firm grip, with thumbs and fingers

encircling the chain saw handles, with both

hands on the saw and position your body and

arm to allow you to resist kickback forces.

Kickback forces can be controlled by the

operator, if proper precautions are taken. Do not

let go of the chain saw.

• Do not overreach and do not cut above

shoulder height.

This helps prevent unintended

tip contact and enables better control of the chain

saw in unexpected situations.

• Only use replacement bars and chains

specified by the manufacturer.

Incorrect

replacement bars and chains may cause chain

breakage and/or kickback.

• Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to

increased kickback.

Additional Safety Recommendations

1.Manual use. All persons using this machine

must read the user manual completely with

extreme care. The user manual must be included

with the machine in the case of sale or loan to

another person.

2.Precautions prior to machine use. Never

permit this machine to be used by any persons

who are not perfectly familiar with the manual

instructions. Inexperienced persons must follow a

training period operating on a saw horse only.

3.Control checks. Check the machine with care

before use each time, especially if it has been

subject to strong impact, or if it shows any signs

of malfunction. Perform all operations described

in the chapter “Maintenance & Storage – Before

each use”.

4.Repairs and Maintenance. All the machine

parts that can be replaced personally, are clearly

explained in the “Assembly / disassembly”

instructions chapter. Where necessary, all other

machine parts must be replaced exclusively by an

Authorised Service Centre.

5.Clothing. (fig B1) When using this machine the

user must wear the following approved individual

protective clothing : close-fitting protective

clothing, safety boots with non-slip soles, crush-

proof toe protectors and cut-proof protection, cut-

proof vibration-proof gloves, protective goggles or

safety visor, ear protection muffs and helmet (if

there is any danger of falling objects). Obtainable

from a workwear supplier

6.Health precautions – Vibrations and Noise

levels. Please be aware of noise restrictions in

the immediate area. Prolonged machine use

exposes the user to vibrations that can generate

“white finger phenomenon” (Raynaudʼs

Phenomenon), carpal tunnel syndrome and

similar disturbances.

7.Health precautions – Chemical agents. Use oil

which is approved by the manufacturer.

8.Health precautions - Heat. During use, sprocket and

chain reach very high temperatures, take care not to

touch these parts while hot.

Transport and storage precautions. (fig B2) Each

time the work area is changed to another location,

disconnect the machine from the mains supply and

activate the chain brake lever. Mount the guide bar

cover guard each time before transporting or

storage. Always carry the machine by hand with the

bar facing backwards, or when transporting the

machine in a vehicle, always attach it securely to

prevent damage.

Kickback reaction. (fig B3) The kickback reaction

consists of a violent upwards-reverse action of the

bar towards the user. This generally occurs if the

upper part of the bar nose (called the “kickback

danger zone” ) (see red marking on the Guide Bar)

comes into contact with some object, or if the chain

is blocked in the wood. Kickback can make the user

loose control of the machine provoking dangerous

and even fatal accidents. The chain brake lever and

other safety devices are not sufficient to protect the

user against injury: the user must be well aware of

the conditions that can provoke the reaction, and

prevent them by paying very close attention

according to experience, together with prudent and

correct machine handling (for example: never cut

several branches at a time because this can cause

accidental impact on the “kickback danger zone”

Work area safety

1. Never allow children or people unfamiliar with

these instructions to use the product. Local

regulations may restrict the age of the operator.

2. Only use the product in the manner and for the

functions described in these instructions.

3. Check the whole work area carefully to check for any

danger source (e.g.: roads, paths, electric cables,

dangerous trees, etc)

4. Keep all bystanders and animals well clear of the

work area (where necessary, fence off the area and

use warning signs) at a minimum distance of 2.5 x

the trunk height; in any case no less than ten

metres.

5. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

ENGLISH - 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena CST 3519-X-8862 in the language / languages: English as an attachment in your email.

The manual is 7.69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena CST 3519-X-8862

Gardena CST 3519-X-8862 User Manual - German - 21 pages

Gardena CST 3519-X-8862 User Manual - Dutch - 21 pages

Gardena CST 3519-X-8862 User Manual - French - 21 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena CST 3519-X-8862 Manual

Product: